Changelog
What changed in the pistols, optics and mount systems, and why. Coverage today: 178 pistols · 77
optics · 18 footprints · 57 systems.
Eleven source links followed to their new addresses after the weekly link check
Links that had moved were re-read and updated only where the new page is the same product or document: Springfield's Echelon pin set page (now named "Pin Set", still the three-set kit), C&H's Agency Optic System plate for the Holosun 407K / 507K (same SKU and screws), Ruger's RXM manual (the 4/2026 edition, same optic-mounting section and thread figures), Vortex's Defender-ST page, and the six Dawson Precision GLOCK MOS co-witness sight sets (renamed pages, same sets for the same optics).
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- GLOCK's MOS adapter-plate sheet now redirects to a home page, and the Gen6 page that had the set contents now loads one that doesn't show them, so neither link was changed. Holosun's EPS pages now redirect to a category page, FN's MRD pages to a generic kit listing and a law-enforcement variant: not the same product, so the links stay as they were.
Optics-ready pistols re-read against the makers' own manuals and plate listings: HK, Canik, S&W, Staccato, GLOCK, PSA, Taurus, CZ, Shadow Systems, Ruger and Springfield
In fourteen batches, optics-ready pistols now cite the maker's own documents instead of retailer pages and owner reports: the HK VP9 and SFP9; Canik's METE, TTI Combat, TP9 SFx, SFx Rival and TP9 Elite SC; S&W's Shield Plus, Shield M2.0 and Equalizer; Staccato's C2, P, XC and XL; GLOCK's Gen6 ORS and Slimline MOS (43X / 48); the PSA Dagger; the Taurus GX4 T.O.R.O.; CZ's P-10, Shadow 2 OR, Shadow 2 Carry and P-09 Nocturne; Shadow Systems' MR920, DR920, XR920 and CR920; the Ruger RXM; and the Springfield Echelon. Each page links the manual, sheet or listing its figures came from.
Plates now fit only the optics their maker names, not every optic on the same footprint. Some optics lost a route as a result: the Swampfox Justice II and Liberty II, Riton, Meprolight and C-More RTS2 on HK's plates; the Hex Dragonfly and Meopta MeoSight IV on the PSA Dagger; the ADE NUWAcc Pro on the Taurus GX4; the Vortex Venom, Burris FastFire 3, Noblex, Meopta, Sightmark, UTG and Lucid E7 on the Echelon; and the Aimpoint ACRO, Steiner MPS, Viridian RFX45 and Lucid E7 on the Shadow Systems and Ruger RXM slides. They come back when a maker lists them.
Several pistols turned out to take optics directly, with no plate to buy. Ruger's RXM manual says the slide takes the RMR, Leupold DeltaPoint Pro and Shield RMSc patterns on dowel pins from the box (6-32 for the RMR pattern, M4 x 0.7 for the other two). Shadow Systems' MR920, DR920 and XR920 take optics from several footprints straight on with Shadow's own screws, and the seven "Shadow Systems" plates the site offered were removed, since Shadow sells none; the CR920 has its own system and optic-fit table, with four C&H plates. The CZ Shadow 2 Carry has its own system, with the Shield RMSc and Holosun K footprints both direct. The Canik METE's optic goes on one of the three interfaces that come in the box. The Springfield Echelon's VIS chart now gives each optic its pin set and where its screws come from, and the SIG ROMEO2 now fits.
The reverse also happened. S&W's Shield M2.0 Optics Ready and Equalizer had been treated as the same cut as the Shield Plus; S&W says otherwise or nothing, so neither lists an optic as bolting straight on. The TP9 Elite SC lost its RMR, Docter, DeltaPoint Pro and ACRO routes because Canik lists only the Shield RMSc footprint for it. Canik's pistols are no longer treated as one family with a shared four-plate kit: each model has its own numbered interfaces.
What comes in the box was corrected in both directions. HK's manual says its optic plates are not included with an optics-ready VP9; CZ publishes nothing that says plates come with the P-10 or Shadow 2 OR (CZ-USA sells them separately), so those pages now count a plate to buy; Taurus ships the GX4 with a flush slide cover, and the RMRcc plate is sold separately. GLOCK's own set sheet lists the three Gen6 plates, so each is marked as in the box, with the optic's screws going through the plate into the slide.
Threads and torque now come from the makers: HK 2 Nm (17.7 in-lb, converted) for its plate screws; Taurus M4 x 0.7 and 8.2 in-lb, with at least 4 threads of engagement; GLOCK Gen6's plates 6-32 (02), 8-32 (03) and M4 (04), and the Slimline's M4 screws; Staccato 25 in-lb for the kit, on the seven plates with a kit page; CZ's P-10 plate 1.3 Nm (11.5 in-lb, converted); EGW's PSA Dagger Docter adapter 6-32 screws at 15 in-lb; Shadow Systems 10-20 in-lb for optics bolted straight on; Springfield's Echelon adapter plates 8-32, "do not exceed 18 in-lbs". Where a maker gives no figure, the page now says so instead of borrowing one. The Canik METE page's "M3 or M4, by optic base", which came from a retailer's screw listings, was removed.
Plate-to-slide thread corrected on the Echelon: every plated Aimpoint ACRO and Trijicon RCR route said "set by the slide" even where the plate's maker lists a thread (191 of 606 such routes, from C&H, Springfield and others). It now shows the plate maker's thread. The Shadow Systems MR920, DR920 and XR920 optic-fit table was also corrected to Shadow's current one: the Holosun 407K, 507K, EPS and EPS Carry and the Shield RMSc take Spacer D with screw set 1, the SIG ROMEO1PRO is off the table, and the EOTech EFLX is added.
New plates, each from its maker's or seller's own listing: HK's own plates with their part numbers, including one for the Holosun 509T; C&H's EPS, ACRO and Steiner MPS plates and EGW's two plates for the VP9 optics-ready cut; Staccato's Holosun 509T, Trijicon RMRcc, Steiner MPS and Vortex Defender-CCW plates, and the Holosun K, EPS, RMR-pattern, ACRO and MPS plates as the separate parts Dawson lists; CZ Parts' eight Shadow 2 plates and seven P-10 plates, including Holosun 509T plates, a C-More RTS plate and an Aimpoint A-Cut plate; C&H's plates for the S&W Shield Plus (Holosun EPS), Shield M2.0 (EPS family) and Equalizer (407K / 507K and 509T) and for the GLOCK Slimline MOS (EPS family, and a steel RMR plate); and Calculated Kinetics' own METE and TP9 Elite SC plates. Plates with no maker or listing are gone: two Optics Spot plates for the VP9, Staccato's C-More RTS2 plate and PSA's "Dagger RMR Optic Plate". Dead retailer links were replaced with the makers' own.
Claims that rested on owner reports or retailers and that no maker document supports were taken out: that the GLOCK Gen6 optic "sits lower" or rotates on the polymer, the RXM's iron-sight clearance reports and "MOS+" re-mill, and a "not for the MOS-K slide" line on Trijicon's Slimline plate. CZ Parts is now described as an independent company, not part of the CZ Group.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- Pages behind a bot check or that need a browser: PSA's Dagger manual and listings, HK USA's VP9 Match page and Aimpoint's ACRO plate page, Taurus's site and Springfield's Echelon manual. Nothing from PSA was recorded; the others were taken from site feeds, distributor-hosted copies of the makers' files or earlier reads.
- Torque or thread that the maker does not state, left as not on file: Canik's interfaces and optic screws, the CZ Shadow 2's plates and slide, the Shadow Systems CR920's slide thread, Staccato's plate screws and thread, HK's optic screws, GLOCK Gen6's optic torque and the Gen6 slide's own tapped thread.
- Optics a maker does not name for a plate or cut: the Holosun EPS family and Osight K on the RXM, the Trijicon RCR's dowel pins on the RXM, the Holosun K optics on the Canik METE, the Holosun 509T on the Echelon (Springfield shows it on pin set 1 but names no plate), the EOTech EFLX on Staccato and GLOCK Gen6, and the VP9SK OR and European SFP9 OR on HK's plates.
- Serial-dependent fits: which interface takes a Trijicon RMRcc on a Canik METE made before the serial changeover stays "depends on your serial", and the version-dependent "collimator sight plate" in the CZ Shadow 2 parts list is not matched to a plate.
- Torque figures from older or looser sources: Staccato's knowledge-center chart, which names the older DUO plates and is not tied to the current kits, and a 15-20 in-lb range on a third-party Taurus page, which Taurus's own 8.2 in-lbs contradicts.
- The CZ Nocturne's footprint: CZ's manual names none, so the Nocturne keeps the Holosun K as a direct mount and still does not claim the RMSc, a claim only two retailers make.
- Models the makers' documents do not cover: the Canik TTI Combat Master, S&W's Shield X and Carry Comp, the Taurus GX4 Graphene T.O.R.O., and HK's VP9A1 plate 7 for the Shield RMSc, which HK's webshop does not sell.
- Whether Shadow Systems' CR920 spacers are optional, and whether every large-window or Docter-pattern optic really fits the Shadow recess: Shadow says only that an optic that fits and lines up with a set of holes can likely be mounted.
GLOCK, SIG, S&W, Springfield and Walther: plate threads, torque and plates from the makers' own documents
Walther PDP 1.0: Walther's own PDP manual now backs the plate screws. The factory mount bases are held by M3 × 6 screws, T10, tightened to "approximately 2 Nm" (shown here as 17.7 in-lb, converted), with pre-applied blue threadlocker; the page shows that torque for Walther's plates only, and "per plate maker" for C&H's, which give none. Walther Arms' listings define the cut: Generation 1 is the flat-bottom cut, Generation 2 the lug-bottom one.
PDP 1.0 plate links: Walther's factory DeltaPoint Pro and Docter/Vortex plates pointed at carl-walther.com pages that return an error (RQ-032). They now link Walther Arms' own Gen 1 DeltaPoint Pro and Vortex listings.
PDP 1.0 C&H plates, each offered only for the optics its listing names: the Holosun K plate no longer claims the EPS (a separate C&H plate for the EPS, EPS Carry and SCS Carry is added) and names the Olight Osight S; the ACRO plate names the Aimpoint ACRO, P1 and P2, not the Steiner MPS. Walther's own RMR, DeltaPoint Pro and Vortex plates are named by footprint and still take every optic on it. On the PDP 1.0 the Olight Osight K, Steiner MPS, Viridian RFX45 and Lucid E7 now have no plate until a maker lists one.
Walther F-Series: two Walther documents suggest it has the 2.0 (lug-bottom) cut, not the 1.0 cut it is filed under; it stays put with a note on its page until Walther says (RQ-053).
SIG optics now show the torque SIG's own manuals give, in place of the RMSc footprint's usual 10–15 in-lb. The ROMEOZero and ROMEOZero-ELITE are 9 in-lb (both manuals, on any slide, and SIG warns that over-torquing the mounting screws can disturb the windage and elevation adjustments); the open ROMEO-X Compact on a P365 is 24 in-lb on an M3 slide and 28 in-lb on an M4 steel slide. The optic's own page shows the maker's figure beside the footprint's, and a torque below 10 in-lb now says that many torque drivers do not reach it.
SIG P365 and P322 slide threads (M3 × 0.5, and M4 × 0.7 on later P365 slides) are now backed by SIG's own manuals as well as its screw-set pages: the ROMEOZero (M3 for any optics-ready P365 or P322), the ROMEO-X table ("P365 with M3 screw holes", "P365 with M4 screw holes", "SIG P322") and the ROMEOZero-ELITE. The same ELITE manual names M4 × 0.7 screws for the Springfield Hellcat OSP and the GLOCK 43X MOS, which now cite it for their thread too.
SIG-LOC footprints: the driver is T8 Torx and the torque 18 in-lb (SIG-LOC, the ROMEO-X SIG-LOC Compact) or 20 in-lb (SIG-LOC PRO), from SIG's manuals, in place of "per SIG manual". Both manuals put threadlocker on the screws and have the owner strip the slide first; neither names a thread.
Springfield Hellcat (OSP cut): the slide's M4 × 0.7 thread, already from Springfield's manual, is now also backed by Springfield's own hardware kit for the Shield RMSc, SMSc and JPoint, and the cut's name is backed by Springfield and HEX: Springfield says the slide is milled for its Micro footprint, and HEX's Wasp page calls that "Springfield Micro, Shield RMSc footprint". The manual gives no torque, so the page still says so.
Hellcat plates: C&H sells a separate Hellcat plate for the Holosun EPS, EPS Carry and SCS Carry, now listed; its 407K / 507K plate no longer claims them. C&H's Hellcat RMR plate ships a set of screws for each optic it names (Holosun 407C / 507C / 508T, RMR, SRO and RMR HD, its own optics), so it is now offered only for those. The 507COMP, 407COMP, 507-Promax, Swampfox, MPO-DF, Riton PRD and other RMR-pattern optics, and the Osight K, have no plate on the Hellcat until a maker lists one (RQ-049).
S&W M&P M2.0 (C.O.R.E.): the factory plates now carry S&W's own numbers, and each optic goes on the plate S&W's optic fitment guide names for it. The Holosun 407K, 507K and EPS Carry fit on Plate 2, which comes with the pistol, so there is nothing to buy; the C-More RTS2 and STS2 (Plate 4) and SIG's ROMEO2 (Plate 6) now fit, where the site said they did not; the ROMEO1PRO and the Trijicon RCR gain a factory route (Plates 6 and 1).
Corrected: the Holosun 508T is no longer put on S&W's RMR plate. S&W's guide sends it to Holosun's own plate.
The Trijicon RCR's build sheet no longer tells everyone to buy a separate RCR plate. Where the plate's maker lists the RCR on its RMR plate (S&W, C&H's P320 and Gen6 plates, Forward Controls' OPF-G6), it says so, and the RCR now fits a Gen6 on those plates.
SIG P320 (optic-ready X-series slides): the slide's own thread is now on file, M4 × 0.7, from SIG's ROMEO1PRO and ROMEO2 manuals, which both mount straight to the PRO cut on M4 × 0.7 screws. The ROMEO1PRO footprint now gives SIG's 28–30 in-lb and M4 screws in place of "per SIG manual".
Corrected: the ROMEO2's mounting torque is 28 in-lb, not 24. SIG's ROMEO2 manual says 28 in-lb and ships a 28 in-lb torque-limiter socket; the 24 on file matched no SIG document.
P320 plates: the row that offered the Holosun EPS on C&H's 407K / 507K plate is split in two, because C&H sells a separate P320 plate for the EPS, EPS Carry and SCS Carry. The 407K / 507K plate now also lists the Vortex Defender-CCW and Olight Osight S, as C&H does. The unnamed "aftermarket" RMSc plate is replaced by Shield's own P320X mount, for Shield's sights.
GLOCK Gen6 (ORS) slides now list the aftermarket plates their makers sell for them: six from C&H Precision (Gen 6 MIL/LEO, for the RMR and Holosun C-series, DeltaPoint Pro, ACRO, Holosun EPS, 509T and 407K / 507K patterns) and three from Forward Controls Design (OPF-G6 for the RMR, ACRO and DeltaPoint Pro). The 509T, the ACRO, the Steiner MPS and the Holosun K and EPS optics now fit a Gen6, on a plate; 41 of the 77 optics do, up from 27. Each plate links its maker's listing and carries the screw thread it lists.
Each of these plates fits only the optics its maker names for it, not every optic with the same footprint. FCD makes its RMR plate for Trijicon's own RMR, RMR HD and SRO and says so, so a Holosun 507C is not offered it; C&H sells its EPS and 407K / 507K plates as different parts, so each is offered only for its own optics. Pages now follow a plate maker's own list wherever it gives one.
All eight GLOCK MOS adapter plates now carry the threads GLOCK prints on its accompanying sheet for the plates: M3 × 6 Torx plate screws on every plate, and the thread each plate takes the optic's screws in: M3 on plates 01 and 05, 6-32 UNC on 02 and 06, 8-32 UNC on 03 and 07, M4 on 04 and 08. Build sheets and pair pages show them in place of "per plate maker, not on file here", and name the sheet as their source.
The 13.1 in-lb (1.5 Nm) plate-screw torque the site already gave for GLOCK's plates now cites that sheet, for both the standard 25.5 mm slides and the 27.5 mm (10 mm and .45) ones.
On a pistol whose plate ships in the box, the buying advice still says to look in the box for optic screws first, and now names the thread to buy if there are none, cut short enough for the plate: GLOCK's sheet says the optic's screw must not come through the 2.5 mm plate.
The plates GLOCK sells on their own (01, 03, 04, 05, 07 and 08) no longer say their optic screws come with the plate. GLOCK's sheet lists the set as the plate and M3 plate screws only, and says to fit the optic as its maker directs, with screws that do not come through the plate. The build sheet and the buying advice now say that.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- Whether optic screws come in the pistol's box (RQ-009). The sheet lists what a plate set contains, the plate and three M3 × 6 screws, but not what a pistol's box holds, so the pages still say to look.
- Optic-screw torque on the factory plates. GLOCK's sheet gives a torque for the plate screws only and says to install the optic as its maker directs; no figure was carried across.
- The Trijicon RCR on the Gen6 RMR plates. Both makers list it, but the build sheet tells RCR buyers that a plate maker's RMR version is a different part, which is true on MOS and not here (RQ-041).
- The thread tapped in the Gen6 slide itself. FCD says 6-32 and M4, with the optic's screws passing through GLOCK's insert into the slide; GLOCK's own pages don't say, so the factory inserts stay "not on file" (RQ-040).
- FCD's COA plate, which FCD lists as a placeholder, not yet for sale.
- RMSc-footprint optics other than Shield's own on the P320 (the ROMEOZero, EPS-CORE, Sentinel II and others). They were offered an unnamed plate; no plate maker on file names them for the P320, so the answer is now no known fit rather than a guess.
- The same "Holosun K / EPS" naming on seven other systems' plates, to be read maker by maker (RQ-044).
- The PDP 1.0 "RMSc" plate, still named only "Aftermarket" (RQ-054), and the torque for C&H's PDP plates (RQ-055).
- Where SIG's own manuals disagree: the open and enclosed ROMEO-X give 24 and 20 in-lb on a P365's M3 slide, and the ROMEO1PRO and ROMEO-X give 28–30 and 24 in-lb on the PRO cut (RQ-051). The ROMEO-X Compact's own manual gives no P322 figure, so it keeps the footprint's.
- Holosun K optics direct on the P365 and P322: Holosun's page says the K footprint mounts direct on "many" optics-ready pistols and names none (RQ-052).
- The HEX Wasp's status: HEX's own page is headed "HEX Wasp 2.0 DISCONTINUED" (RQ-048).
- The Vortex Venom on the M&P: S&W's guide puts "Venom" on its DeltaPoint Pro plate, where the site has it on the Docter plate; which Venom S&W means is unclear (RQ-046).
- The Viridian RFX35's footprint. S&W's guide agrees with Viridian that it is RMR-pattern; the change moves answers on every pistol and gets its own batch (RQ-025).
Plate screw threads from C&H Precision's own hardware lists
34 C&H plates now carry the screw threads C&H prints in each listing's "Included" hardware list: the plate-to-slide thread (M3 on the Walther PDP and Q-series plates, M4 on the Hellcat, HK VP9 and P320 plates, #6-32 on the S&W M2.0 plates, #6-48 on the Springfield AOS plates) and, where the plate takes the optic's screws into its own T-nuts, the 4-40 optic thread. Build sheets and pair pages show them in place of "per plate maker".
Only screws C&H labels as plate or optic mounting screws were used. Where a listing names only screws that pass through the optic and plate into the slide, nothing was added.
The Meprolight MPO-DF now has its window (0.89 × 0.68 in, 22.6 × 17.3 mm), weight (1.2 oz) and battery (CR1632) from Meprolight's own page, and its dot is 3.5 MOA, not 3.
Where no figure is on file, pages now say "per plate maker, not on file here" rather than the bare phrase, and a GLOCK torque figure is no longer printed beside a non-GLOCK plate as if it applied.
Renamed on 2026-09-30, with the threads above unchanged: two Walther PDP 1.0 plates, "ACRO / MPS" and "Holosun K / EPS", are now "Aimpoint ACRO (steel)" and "Holosun 407K / 507K / Osight S", because C&H's listings name those optics and not the MPS or the EPS. On 2026-10-01 the Ruger RXM's "RMSc / Holosun K" plate became "Holosun 407K / 507K" (the RMSc pattern mounts directly on that slide), its M4 optic thread unchanged.On 2026-10-01 two C&H plates for the HK VP9 were renamed, "Trijicon RMR" to "Trijicon RMR / SRO / Holosun C" and "Holosun K" to "Holosun K / Osight S", to match C&H's listings; their threads are unchanged.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- Torque for these plates. C&H prints 12–15 in-lb on its GLOCK MOS plate only; it is not carried over to plates whose listings give no figure.
- Plate hardware from other plate makers, still to be read from their own listings.
Optic windows and weights, re-checked against the makers' own spec sheets
48 of the 77 optics now name the maker page or document their window and weight came from, and their pages link it. Compare shows the source in its own row, so two columns can be checked against the makers side by side.
Several figures were wrong. The SRO window is a 25 mm circle cut flat at the bottom, 22.5 mm tall (Trijicon's spec sheet and its actual-size window chart), not a full 25.4 mm circle, and the RMRcc window as 18.7 × 12.8 mm. Holosun's own pages give the 507COMP / 407COMP window as 27.9 × 22.1 mm (1.1 × 0.87 in) and the 509T's as 22.9 × 16.8 mm. The Swampfox Sentinel II had the first generation's 16 mm window and 0.6 oz on file; Swampfox gives 20 × 17 mm and 0.99 oz. The Justice II has a 6 MOA dot, not 3.
Window sizes added for 8 optics that had none: the Holosun EPS-CORE, SCS Carry, SCS MOS and SCS 320, the SIG ROMEOZero, the Trijicon RCR and the C-More RTS2 and STS2. Nine more, from SIG and Swampfox, now show the one lens figure their maker gives. Weights were added for 20.
SIG and Swampfox publish one figure for some optics, a clear aperture or a lens size, not a width and a height. Those print as the maker words them ("24 mm clear aperture"), and the to-scale drawing in Compare leaves them out rather than guessing an outline.
Weights stated by the maker without the battery (Shield) or without a shroud (SIG ROMEO2) now say so.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- The Shield RMSc's 23 × 17 mm window. Shield publishes no window size, and 23 mm is the width of the whole housing, so it was removed rather than kept.
- The ROMEO1PRO's 30 × 22 mm window. SIG gives only a 30 mm diagonal, so that is what the page says now.
- Aimpoint, the Vortex window sizes and 29 smaller-brand optics. Aimpoint's site refused automated reads, Vortex publishes weight but no window, and the rest are still unchecked. They keep what was on file and show no source.
Slim-slide screw threads: the P365, P322, Hellcat and Shield no longer show GLOCK's
44 → 50 systems
Every pistol with a slim RMSc-pattern cut was filed under GLOCK's Slimline MOS, so its page said the slide was tapped M4 × 0.7 and warned about GLOCK's screws. That was wrong for early P365 slides, which SIG taps M3 × 0.5. Each maker whose thread is published now has a system of its own, and the page links the source.
SIG P365 family: M3 × 0.5 on early slides and M4 × 0.7 on later ones, per SIG's own screw-set pages. The model name doesn't tell you which, so the page gives both. SIG P322: M3 × 0.5, per SIG.
Springfield Hellcat OSP, Hellcat Pro, Hellcat RDP and Hellcat Pro Comp OSP: M4 × 0.7, per Springfield's Hellcat manual, which covers every Hellcat model. SIG lists the same thread for the Hellcat.
S&W M&P Shield Plus Optics Ready, Shield M2.0 Optics Ready and Equalizer: #6-32. S&W doesn't publish it; Shield Sights and TACRIG both sell #6-32 screws for these slides.
Canik METE SF, SFx, SFT and SFT Pro: a system of their own. Canik mills the METE slide for Shield RMSc plus a second pattern that changed during production, RMRcc on earlier slides and RMR on later ones (METE SFT from serial 25CC08376, METE SFx from 26BY00001). Their pages now say so. The thread is in the optic base Canik fits, M3 or M4, and Canik sells screws for each.
25 other slim slides, from the Beretta APX Carry to the Ruger MAX-9, have no published thread on file. Their pages now say so instead of showing GLOCK's. Which optics fit them is unchanged.
Pair pages for the P365, P365X, P365XL, P365-XMACRO, Hellcat OSP, Hellcat Pro, Shield Plus Optics Ready and METE SFx, held back until this was fixed, are now published.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- A thread for the Ruger MAX-9, Shadow Systems CR920 and the other unconfirmed slides above. No maker or seller source for one has turned up yet.
- RMR and RMRcc optics as direct fits on the METE. Which one a slide takes depends on its serial, and the fit checker can't ask for one, so only the RMSc pattern every METE shares is listed as a fit.
- The Shield Plus Carry Comp and XD-S Mod.2 OSP probably share a cut with the Shield Plus and the Hellcat. No source says so, so their thread stays unconfirmed.
- The METE MC9, MC9L and MC9 Prime stay with the other unconfirmed slim slides. Canik doesn't say whether their cut matches the full-size METE.
Co-witness data published by pistol and sight makers, attributed pair by pair
Optic makers don't publish deck heights, so the co-witness verdict is still the typical case for each kind of optic. New: the specific data that makers do publish, shown separately from the verdict. That's sight makers' heights for their own sight sets on a named pistol and optic, and pistol makers' statements about their factory sights. Each line links to its source.
Sight-maker data covers 265 pistol + optic pairs from 17 source pages: Night Fision's co-witness charts (GLOCK 17/19/26/34/45 and 43X/48, the full-size M&P, Shield Plus, MAX-9, Hellcat OSP and XD-S Mod.2 OSP, the VP9, the Walther PDP), Dawson Precision's fixed co-witness sets for GLOCK MOS and the P365, Springfield's optic-height Echelon sights, and CZ's DeltaPoint Pro co-witness set for the P-10.
Factory-sight statements for seven models whose makers state it directly: the FN 509 MRD and Tactical, 509 Midsize and Compact MRD, 509 LS Edge, 509 CC Edge, 510 and 545 MRD, the Ruger RXM, and the Hellcat RDP (whose claim covers the optic it ships with).
Where it shows: a collapsed list on each pistol and optic page, a note on each pair page, two rows under the fit checker's verdict, and a sentence in the build sheet.
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- Chart lines for pairs this dataset says don't fit: Night Fision lists an RMRcc on the GLOCK 43X/48 MOS and an ACRO and 509T on the VP9. Those are fitment claims, so they went to the review queue.
- Night Fision's SIG and CZ charts, which don't say which model they mean, and any chart line that gives the same sight set for two different window positions.
- Third-party height calculators and forum reports.
SIG-LOC widens past the Romeo-X, Taurus T.O.R.O. filled in, three pistols confirmed
168 → 178 pistols · 71 → 75 optics · 17 → 18 footprints · 35 → 44 systems
SIG-LOC is no longer Romeo-X only. SIG now sells SIG-LOC slides across the P365 line and SIG-LOC PRO slides for the P320. The SIG-LOC system split into three (P320 M17/M18, P365, P320 SIG-LOC PRO), a SIG-LOC PRO footprint was added, and so were two optics: the ROMEO-X SIG-LOC Compact and ROMEO-X SIG-LOC Pro. All three systems keep their verify flag, because SIG doesn't publish which pattern its recoil-lug pins recreate.
Taurus T.O.R.O. now lists four numbered plates plus two C&H Precision plates, replacing a generic aftermarket guess with named, sourced parts: RMR/RMRcc options for the 856 and Judge, Holosun K and EPS options for the G3/G3c. The GX4 TORO got its own system (RMSc/K direct, plus an RMRcc adapter) and lost a GLOCK screw-thread note that never applied to it.
Three pistols moved out of the generic-plate group with maker-published fitment, and their verify flags were cleared: the Arex Delta Gen2, the Arex Zero 1 Tactical, and the Rost Martin RM1C, whose RMR plate ships in the box.
Two new systems for A-Cut: an Aimpoint ACRO cut on the M&P9 M2.0 Metal, and Springfield's A-Cut across six models. The old glock-acut system was renamed, since A-Cut is no longer GLOCK-only.
Two optics added: the Holosun 507-Promax (RMR footprint) and the EPS-CORE (RMSc footprint, unlike the rest of the EPS family, which uses K).
The Rost Martin RM1S subcompact was added as generic-plate. Its cut isn't published, so it isn't assumed to match the RM1C.
The Ruger American Pistol Competition keeps its flag, now with a sourced negative: standard Ruger American adapter plates are sold as “will not fit Competition.”
Reported but not added yet. These are waiting on a better source, because a guessed
footprint is worse than a missing model:
- Holosun AEMS-MACRO and AEMS-MICRO: a 509T-footprint claim and an RMSc-adapter claim, neither confirmed on Holosun's spec pages.
- Three Olight models (Osight XR, SE, X) and C&H Precision's own optics, whose footprints were only inferred from an article title or an adapter-plate name.