Home / Guides

Guides

Which plate, which screws, whether the irons still work, and what to do when the dot won’t hold zero. New to red dots? Start with the terms.

What the terms mean

Optics-ready
The maker's name for a slide with a factory optic cut: MOS on a GLOCK, OSP on a Springfield, OR on others.
Footprint
The screw-and-lug pattern on the underside of an optic. A slide either has that pattern cut in, or an adapter plate supplies it.
Adapter plate
A metal plate that fits the slide's optic cut and gives it a different footprint.
Direct mount
The slide is cut for the optic's footprint, so the optic bolts straight on.
Cross-fit
A different footprint that still sits in the slide's cut with no plate, such as a Holosun K optic on an RMSc cut that has no rear lugs.
Cover plate
The flat blank screwed over an optics-ready slide's cut when no optic is fitted. It comes off before the optic or plate goes on; its screws are not optic screws.
Open emitter
The LED sits exposed at the back of the optic and shines forward onto the glass. Smaller and lighter, but mud, snow or lint on the emitter can block the dot.
Enclosed emitter
The LED sits inside a sealed housing, so dirt and rain can't block it. These optics sit taller.
Window
The glass you look through. A bigger window makes the dot easier to find as the pistol comes up.
MOA
Minute of angle, how dot size is given: a 3 MOA dot covers about 3 inches at 100 yards, or under an inch at 25. Smaller dots suit precise shots, bigger ones are faster to find.
Co-witness
Seeing the iron sights through the optic's window, as a backup if the dot goes out.
Suppressor-height sights
Taller iron sights that stay visible through a red dot's window.
in-lb
Inch-pounds, the unit for screw torque. Set it with a torque driver, not by feel.