Home / Pistols / Canik TTI Combat / Trijicon RMRcc

Does the Trijicon RMRcc fit the Canik TTI Combat?

No, the Trijicon RMRcc does not fit the Canik TTI Combat: the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Nothing in this database adapts the Canik TTI Combat optic interface plates interface to the Trijicon RMRcc pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Canik TTI Combat Master either: it shares this slide's optic cut.
SlideCanik TTI Combat optic interface plates
Optic footprintTrijicon RMRcc
Slide is cut forno footprint — plates only
Plates made for itShield RMSc, Trijicon RMR, Holosun K, Aimpoint ACRO, Holosun 509T
How this slide mounts an opticCanik's TTI Combat manual says the pistol comes with three optic sight interfaces (numbers 1, 2 and 3) and "may vary based on model configuration"; Canik's product page lists two optic plates in the case, so check what is in yours. Interfaces 1 and 2 take the RMSc-pattern optics and interface 3 the RMR pattern. The manual packs M4 screws with the pistol for interfaces 1 and 2, and says that for interface 3 you use only the #6-32 screws from the optic's own box, not the M3 or M4 screws packed for other footprints. No Canik document gives a torque for the interfaces or the optic screws. Source: Canik, TTI Combat product page ↗.

What fits the Canik TTI Combat instead

46 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$60–150Cyelee Cat / Wolfin-box plate: Canik interface 03 → RMRBuild sheet
Cheapest enclosed emitter$210–395Viridian RFX45plate: TTI → ACROBuild sheet

Popular optics that do fit it:

All 46 optics that fit it

Where the Trijicon RMRcc does go

It mounts to 22 of the 178 pistols tracked here. The popular ones:

All 22 pistols it fits

Sources for this page (3)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Trijicon RMRcc: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Canik TTI Combat’s slide: optic interface plates: which optics each takes, what ships with the pistol, the screws Canik names, and the listing link checked against Canik's owner's manuals (METE SFT, SFx, SF and SFT Pro; TP9 SFx; SFx Rival and Rival-S; TTI Combat; TP9 Elite SC), its product and parts pages on canik.com, and Calculated Kinetics' own listings on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.