No: the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here bridges it.
No known fit
Nothing in this database bridges the Ruger RXM optic cut interface to the Trijicon RMRcc pattern. Looks like a small RMR and is not one. Needs its own cut or plate; will not sit on an RMR or RMSc pattern. A custom plate or a re-mill would be the only route — check with a plate maker before assuming it can't be done.
Plates made for itShield RMSc, Holosun K, Trijicon RMR, Leupold DeltaPoint Pro, Aimpoint ACRO
How this slide mounts an opticThe RXM uses its own cut with adapter plates rather than the GLOCK MOS pocket, despite the gun's broad GLOCK parts compatibility. Plate coverage is now good across RMR, K/RMSc, DPP and ACRO. The factory iron sights sit high enough that tall optics foul them: Steiner MPS and K-series and low-deck DeltaPoint variants clear, while RMRs and SROs generally do not, and 507C and ACRO fits are marginal. Shops offer a 'MOS+' re-mill that converts it to MOS-compatible plates, at the cost of the factory irons.
What fits the Ruger RXM instead
53 of the 75 optics tracked here mount to it. The cheapest ways in:
Something on this page wrong?Say what it should be. Corrections from someone who owns the pistol are why
this is worth more than a spec sheet — and nothing here changes without a source, so bring one.