Home / Pistols / Smith & Wesson M&P9 M2.0 Compact Optics Ready / Trijicon RMRcc

Does the Trijicon RMRcc fit the Smith & Wesson M&P9 M2.0 Compact Optics Ready?

No: the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here bridges it.

No known fit

Nothing in this database bridges the S&W M&P C.O.R.E. / Optics Ready interface to the Trijicon RMRcc pattern. Looks like a small RMR and is not one. Needs its own cut or plate; will not sit on an RMR or RMSc pattern. A custom plate or a re-mill would be the only route — check with a plate maker before assuming it can't be done.

SlideS&W M&P C.O.R.E. / Optics Ready

Optic footprintTrijicon RMRcc

Slide is cut forno footprint — plates only

Plates made for itTrijicon RMR, Leupold DeltaPoint Pro, Docter / Noblex, Shield RMSc, Holosun K, Aimpoint ACRO, Holosun 509T, SIG Romeo1Pro, Trijicon RCR

How this slide mounts an opticA generic pocket plus a plate that supplies the recoil posts. S&W ships a multi-plate kit labelled by optic family rather than by number, and the aftermarket fills in everything the kit misses.

What fits the Smith & Wesson M&P9 M2.0 Compact Optics Ready instead

64 of the 75 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$60–150Cyelee Cat / Wolfin-box plate: Factory kit plate — RMR familyBuild sheet →

Cheapest enclosed emitter$210–395Viridian RFX45plate: M&P 2.0 → Steiner MPS (steel)Build sheet →

And the optics asked about most that do fit it:

All 64 optics that fit it →

Where the Trijicon RMRcc does go

It mounts to 15 of the 178 pistols tracked here. The ones asked about most:

All 15 pistols it fits →

Something on this page wrong? Say what it should be. Corrections from someone who owns the pistol are why this is worth more than a spec sheet — and nothing here changes without a source, so bring one.