Does the Trijicon RMRcc fit the Walther PDP Full Size (1.0)?
No, the Trijicon RMRcc does not fit the Walther PDP Full Size (1.0): the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here adapts it.
Page last updated . Data compiled September 2026 by Andrew Terrebonne.
No known fit
Nothing in this database adapts the Walther PDP 1.0 optic cut interface to the Trijicon RMRcc pattern. Ask a plate maker before ruling it out.
New to red dots? What footprint, plate, co-witness and the rest mean
What fits the Walther PDP Full Size (1.0) instead
59 of the 77 optics tracked here mount to it. The cheapest ways in:
Popular optics that do fit it:
Where the Trijicon RMRcc does go
It mounts to 22 of the 178 pistols tracked here. The popular ones:
Sources for this page (4)
- Slide Carl Walther, PDP pistols safety & instruction manual (2021, rev. a) ↗
- Slide Walther Arms, PDP Gen1 Optic Plate, RMR (Generation 1 Optic Cut, flat bottom) ↗
- Slide Walther Arms, PDP Gen2 Optic Plate, Doctor (Generation 2 Optic Cut, lug bottom) ↗
- Optic Trijicon, RMRcc spec sheet (PML4083-1) ↗
Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.
Last checked against the makers’ documents. The Trijicon RMRcc: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Walther PDP Full Size (1.0)’s slide: the plate screw thread and torque, and the cut's name checked against Carl Walther's PDP manual and Walther Arms' Gen 1 and Gen 2 plate listings on September 30, 2026.