Home / Footprints / Aimpoint ACRO
The Aimpoint ACRO footprint
Page last updated . Data compiled September 2026 by Andrew Terrebonne.
ACRO P-1 / P-2 / C-2, Steiner MPS, Viridian RFX45
- Layout
- Clamp interface with recoil shoulder — not a screw-and-lug pattern
- Screws
- Cross-bolt clamp
- Driver
- T10 / hex per model
- Torque
- per Aimpoint manual
- Pattern
- clamps rather than bolts through
These are the usual figures for this footprint; no maker document is linked for them here yet. What would settle it.
What to knowThe enclosed-emitter standard. It clamps to a rail instead of bolting through: on a plate the plate carries the rail, and on a slide cut for it directly the cut can take over the rear sight dovetail. It sits tall either way.
What uses the Aimpoint ACRO footprint?
6 optics use it, 1 pistol is cut for it and 26 plates provide it. The lists below name each optic, pistol and plate.
Optics using this footprint
Pistols that mount it with no adapter
Plates that provide this footprint
| Slide interface | Plate | Source |
|---|---|---|
| GLOCK MOS — standard & full size | V4 MIL/LEO (one SKU per footprint) | C&H Precision |
| GLOCK MOS — 10 mm / .45 frames | V4 MIL/LEO (large frame) | C&H Precision |
| GLOCK Gen6 ORS | Gen 6 MIL/LEO → Aimpoint ACRO (steel) OPF-G6, ACRO | C&H Precision ↗ Forward Controls Design ↗ |
| Canik METE optic cut (RMSc plus RMRcc or RMR) | METE → ACRO | Calculated Kinetics ↗ |
| S&W M&P C.O.R.E. / Optics Ready | M&P 2.0 → Steiner MPS (steel) Steel plates — MPS / RMR / K | C&H Precision ↗ Athena Precision ↗ |
| SIG P320 optic cut (Romeo1Pro pattern) | P320 → ACRO / Steiner MPS | C&H Precision ↗ |
| Springfield Echelon VIS | VIS → ACRO / MPS adapter | Springfield factory ↗ |
| Springfield AOS | AOS → ACRO / MPS | Springfield / C&H ↗ |
| Walther PDP 1.0 optic cut | PDP 1.0 → Aimpoint ACRO (steel) | C&H Precision ↗ |
| Walther PDP 2.0 optic cut | PDP 2.0 → Aimpoint ACRO / MPS | C&H Precision ↗ |
| CZ P-10 OR plate system | P-10 OR → ACRO / MPS | CZ factory ↗ |
| CZ Shadow 2 OR plate system | Shadow 2 OR → ACRO / MPS | CZ factory ↗ |
| Canik TP9 SFx optic interface plates | Canik interface 05 → ACRO | Canik factory ↗ |
| Canik SFx Rival optic interface plates | Canik interface R05 → ACRO | Canik factory ↗ |
| Canik TTI Combat optic interface plates | TTI → ACRO | Calculated Kinetics ↗ |
| FN MRD plate system | FN MRD → ACRO / MPS | C&H Precision ↗ |
| Beretta 92X / M9A4 plate system | 92X / M9A4 → Aimpoint ACRO / MPS | Beretta factory ↗ |
| Beretta APX A1 / APX RDO plate system | APX A1 / RDO → Aimpoint ACRO / MPS | Beretta factory ↗ |
| HK VP9 / SFP9 OR plate system | HK ACRO plate #6 (50257961) H&K VP9 ACRO mount plate (200521) VP9 / SFP9 → Aimpoint ACRO (steel) VP9 / SFP9 → Steiner MPS (steel) | HK factory ↗ Aimpoint ↗ C&H Precision ↗ C&H Precision ↗ |
| Staccato / 2011 optic plate system | Staccato → Aimpoint ACRO P-1 / P-2 Staccato → Steiner MPS | Dawson Precision ↗ Dawson Precision ↗ |
Check a pairing
The fit checker tells you whether a specific optic and pistol go together, and what it costs to mount.
Something on this page wrong?
Tell us what it should be, and include a source: nothing changes without one.