Home / Pistols / Shadow Systems MR920 / Trijicon RMRcc

Does the Trijicon RMRcc fit the Shadow Systems MR920?

No, the Trijicon RMRcc does not fit the Shadow Systems MR920: the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Nothing in this database adapts the Shadow Systems multi-optic cut (MR920, DR920, XR920) interface to the Trijicon RMRcc pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Shadow Systems DR920 / DR920P, Shadow Systems XR920 / XR920P, Shadow Systems Foundation Series and Shadow Systems MR920 Elite / Combat either: they share this slide's optic cut.
SlideShadow Systems multi-optic cut (MR920, DR920, XR920)
Optic footprintTrijicon RMRcc
Slide is cut forTrijicon RMR, Leupold DeltaPoint Pro, Docter / Noblex, Shield RMSc, Holosun K, SIG Romeo1Pro
Plates made for itTrijicon RMR, Trijicon RCR, Leupold DeltaPoint Pro, Holosun K, Holosun 509T
How this slide mounts an opticNo plates: the slide is cut so that optics from several footprints bolt straight on, held by Shadow's own screws from an optic kit in the pistol box. Shadow's optic-fit table names the Trijicon RMR and SRO, the Holosun 407C, 507C, 508T, 407K, 507K, EPS and EPS Carry, the Leupold DeltaPoint Pro, the EOTech EFLX, the Shield RMSc, the Vortex Viper and a few Swampfox and TruGlo models, and says any optic that fits the recess and lines up with a set of holes can likely be mounted. Shadow's page says the SIG Romeo 1 Pro, left off the table, can take Spacer B sanded to fit its rear. A polymer spacer, sold for most of them, is optional: Shadow says it is not needed to keep the optic on. The rear sight blocks the windage and elevation locking screws on a Viper or Trutec until it is drifted out. C&H Precision sells adapter plates for the optics the cut does not take directly, such as the Holosun 509T.

What fits the Shadow Systems MR920 instead

59 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150Cyelee Cat / Wolfdirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 59 optics that fit it

Where the Trijicon RMRcc does go

It mounts to 22 of the 178 pistols tracked here. The popular ones:

All 22 pistols it fits

Sources for this page (3)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Trijicon RMRcc: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Shadow Systems MR920’s slide: the optic-fit table, torque and the plates the maker does not sell checked against Shadow Systems' optic cut page (the CR920 and MR920 optic-fit tables), its pistol manual and C&H Precision's own CR920 listings on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.