Does the Holosun 507C X2 fit the Smith & Wesson M&P Shield Plus Optics Ready?

No, the Holosun 507C X2 does not fit the Smith & Wesson M&P Shield Plus Optics Ready: the slide is not cut for the Trijicon RMR footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Nothing in this database adapts the S&W M&P Shield Plus optics-ready cut interface to the Trijicon RMR pattern. Ask a plate maker before ruling it out.

SlideS&W M&P Shield Plus optics-ready cut
Optic footprintTrijicon RMR
Slide is cut forShield RMSc
Plates made for itHolosun K
On this modelMilled for the RMSc pattern, which S&W's own articles name for it: no plate for an RMSc-pattern optic. S&W's Shield X and Carry Comp pages say RMSc/K; its Shield Plus pages do not mention the K footprint.
How this slide mounts an opticMilled for the Shield RMSc pattern: S&W's own articles say the optics-ready Shield Plus takes the "Shield RMS optic footprint" and "uses the RMSc footprint", and an RMSc-pattern optic bolts straight on. S&W doesn't say a Holosun K optic does (it does say so for the Shield X and the Carry Comp), and C&H sells plates to put a 407K / 507K or an EPS on this slide, so this site lists those. Nameless Arms, which re-machines these pockets for K optics, says it has measured S&W's pockets sloping 0.5 to 0.75 degrees toward the muzzle, enough that some optics run short of elevation. Source: Smith & Wesson, "Shield Plus now optics ready" (the optics-ready Shield Plus takes any Shield RMS optic footprint) ↗; Smith & Wesson, M&P Shield X vs. Shield Plus (the Shield Plus optics-ready models use the RMSc footprint; the Shield X is RMSc/K) ↗; Nameless Arms, M&P Shield pocket re-machine for Holosun K ↗.

What fits the Smith & Wesson M&P Shield Plus Optics Ready instead

21 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 21 optics that fit it

Where the Holosun 507C X2 does go

It mounts to 110 of the 178 pistols tracked here, 11 of them with no adapter plate. The popular ones:

All 110 pistols it fits

Sources for this page (8)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Holosun 507C X2: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Smith & Wesson M&P Shield Plus Optics Ready’s slide: S&W's Shield Plus / Shield X manual, Equalizer manual and Shield M1 / M2 manual (optic sections), the S&W product pages, spec sheets and articles for these pistols, and C&H's five listings for them checked against smith-wesson.com (pages, the manuals on its document store), shieldsights.com's screw listing and chpws.com's listings, read 2026-10-01 on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.