Home / Optics / SIG Sauer ROMEOZero

What pistols fit the SIG Sauer ROMEOZero?

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

It uses the Shield RMSc footprint and mounts to 143 of the 178 slides tracked here, 59 of them with no adapter plate. An open-emitter optic: 0.4 oz, a CR1632 battery, with a 3 / 6 MOA reticle.

No plate neededPlate neededDoesn’t fit

Pistols that fit143 of 178
No plate to buy80
Plate to buy63
FootprintShield RMSc
EmitterOpen
Window18.3 × 16.4 mm
Dot options3 / 6 MOA
Weight0.4 oz
BatteryCR1632
Screws (footprint)M4 × 0.7 usually; some slides M3 or #6-32
Torque (maker)9 in-lb
Torque (footprint)10–15 in-lb, per the optic or plate maker
Street price$60–150 · SIG Sauer ↗

No plate to buy counts the direct mounts plus the pairings whose plate normally comes in the pistol's or the optic's box. Box contents change between production runs, so check yours before counting on it.

Window and weight from SIG Sauer, ROMEOZero manual ↗. Checked against them September 30, 2026.

About this opticPolymer housing — light, and not a duty optic.

Same slides, different optics

14 other optics on the Shield RMSc footprint go on the same slides as the SIG Sauer ROMEOZero, so the table below answers for them too. What tells them apart:

OpticEmitterWindowWeightBatteryDot
SIG Sauer ROMEOZeroOpen18.3 × 16.4 mm0.4 ozCR16323 / 6 MOA
Shield Sights RMScOpennot published here0.57 oz without batteryCR2032, bottom-load4 / 8 MOA
Shield Sights RMS2Opennot published here0.60 oz without batteryCR2032, tray4 / 8 MOA
SIG Sauer ROMEOZero EliteOpen24 mm objective lens (no width × height published)0.5 oz without battery or shroudCR16322 MOA + 32 MOA circle
Vortex Defender-CCWOpen24 × 16 mm0.95 ozCR2032, top-load3 / 6 MOA
Swampfox Sentinel IIOpen20 × 17 mm0.99 ozCR16323 MOA

All 15 Shield RMSc optics

Sight co-witness, where no sight maker publishes heightsDepends on your front sight height, which can vary by SKU and production run within one model. Standard-height irons: no co-witness. Suppressor-height irons: normally a lower-third co-witness on a direct cut. Mounted directly, the optic sits as low as the cut allows, the best case for a co-witness. That's the typical case for this kind of optic, not a guarantee: pistols don't standardize sight and optic heights the way rifles do. Where one does, its figures are below and take precedence.
Sight heights published for this optic on 1 slide
GLOCK 17 / 19 / 34 Gen4 MOS
  • Dawson Precision · co-witness · front .415 / rear .420 in

Heights are front / rear in inches, as each sight maker measures its own sights. That's not a deck height, and it doesn't compare across makers to the thousandth. Absolute puts the front sight level with the dot; lower 1/3 and lower 1/5 sit it lower in the window. A sight maker sells a handful of fixed heights, so optics of similar height share one set: the same figures under two optics are the maker's chart saying so, not a copy.

Dawson Precision — fixed co-witness set for GLOCK MOS with a ROMEOZero or Venom ↗

Shield RMSc footprintThe most common cut on carry-size pistols. Whether a Holosun K optic goes straight on depends on the slide, not the footprint: a K optic has recesses for the two front lugs only, so it drops onto an RMSc cut with no rear lugs, but a cut that has all four (the original GLOCK Slimline MOS) needs a plate. Each pistol's page says which it is.

Simplest slides to mount it on

No plate needed$60–150SIG Sauer P365XLdirect — no adapter58 other slides also take it with no plateBuild sheet
Plate already in the box$60–150Smith & Wesson M&P9 M2.0 Optics Ready (4.25 / 4.6 / 5 in)in-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)All 80 with no plate to buyBuild sheet
Cheapest plate to buy$73–175Taurus G3 TORO / G3X TOROplate: T.O.R.O. Plate #4Every slide it fits, cheapest firstBuild sheet

Cost to mount is the optic plus the cheapest plate that fits, in approximate street-price bands from September 2026, for comparing routes. Pistols aren't priced, so when slides tie, the card names the most popular one.

Every pistol, and how it mounts

ItemSlide cutHow it mountsCost to mount
Direct — 48
Archon Firearms Type B / Type D ORBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Avidity Arms PD10Build sheetRMSc-pattern direct cutdirect — no adapter$60–150
Beretta APX A1 CarryBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Bersa BP9CC ORBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Canik METE MC9 / MC9LBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Canik METE MC9 PrimeBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
CZ Shadow 2 CarryBuild sheetCZ Shadow 2 Carry direct cut (Shield RMSc and Holosun K)direct — no adapter$60–150
FN Reflex MRDBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Girsan Witness2311Build sheetRMSc-pattern direct cutdirect — no adapter$60–150
GLOCK 43X / 48 Rail MOSBuild sheetGLOCK Slimline MOS (43X / 48)direct — no adapter$60–150
GLOCK 43X MOSBuild sheetGLOCK Slimline MOS (43X / 48)direct — no adapter$60–150
GLOCK 48 MOSBuild sheetGLOCK Slimline MOS (43X / 48)direct — no adapter$60–150
IWI Masada SlimBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Mossberg MC2sc Optic ReadyBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Palmetto State Armory 5.7 Rock Optics ReadyBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Palmetto State Armory Dagger MicroBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Rock Island Armory STK100Build sheetRMSc-pattern direct cutdirect — no adapter$60–150
Ruger MAX-9Build sheetRMSc-pattern direct cutdirect — no adapter$60–150
Ruger Ruger-5.7 Optics ReadyBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
SCCY CPX RDR / DVG-1 RDRBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Shadow Systems CR920 / CR920PBuild sheetShadow Systems CR920 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P322 / P322 CompBuild sheetSIG P322 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365 FuseBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365 Optics ReadyBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365-380Build sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365-AXG LegionBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365-XMACRO / XMACRO CompBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365XBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
SIG Sauer P365XLBuild sheetSIG P365 optic cut (RMSc pattern)direct — no adapter$60–150
Smith & Wesson CSX E-Series Optics ReadyBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Smith & Wesson M&P 22 MagnumBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Smith & Wesson M&P 5.7Build sheetS&W M&P 5.7 direct cutdirect — no adapter$60–150
Smith & Wesson M&P Shield Plus Carry CompBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Smith & Wesson M&P Shield Plus Optics ReadyBuild sheetS&W M&P Shield Plus optics-ready cutdirect — no adapter$60–150
Springfield Armory Hellcat OSPBuild sheetSpringfield Hellcat OSP cut (Micro footprint)direct — no adapter$60–150
Springfield Armory Hellcat ProBuild sheetSpringfield Hellcat OSP cut (Micro footprint)direct — no adapter$60–150
Springfield Armory Hellcat Pro Comp OSPBuild sheetSpringfield Hellcat OSP cut (Micro footprint)direct — no adapter$60–150
Springfield Armory Hellcat RDPBuild sheetSpringfield Hellcat OSP cut (Micro footprint)direct — no adapter$60–150
Springfield Armory XD-S Mod.2 OSPBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Staccato CSBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Stoeger STR-9MCBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Taurus Defender 856 TOROBuild sheetTaurus 856 T.O.R.O. revolver cutdirect — no adapter$60–150
Taurus GX4 Carry TOROBuild sheetTaurus GX4 T.O.R.O. direct cutdirect — no adapter$60–150
Taurus GX4 Graphene TOROBuild sheetTaurus GX4 T.O.R.O. direct cutdirect — no adapter$60–150
Taurus GX4 TORO / GX4XLBuild sheetTaurus GX4 T.O.R.O. direct cutdirect — no adapter$60–150
Taurus Judge TORO / Raging HunterBuild sheetTaurus Judge T.O.R.O. revolver cutdirect — no adapter$60–150
Taurus TX22 CompactBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Tisas Carry DS / Duty DSBuild sheetRMSc-pattern direct cutdirect — no adapter$60–150
Direct (cross-fit) — 11
GLOCK 43X / 48 MOS-KBuild sheetGLOCK Slimline MOS-Kdirect — no adapter$60–150
Ruger RXMBuild sheetRuger RXM direct-mount optic cut (RMR, DPP, RMSc)direct — no adapter$60–150
Ruger RXM CompactBuild sheetRuger RXM direct-mount optic cut (RMR, DPP, RMSc)direct — no adapter$60–150
Shadow Systems DR920 / DR920PBuild sheetShadow Systems multi-optic cut (MR920, DR920, XR920)direct — no adapter$60–150
Shadow Systems Foundation SeriesBuild sheetShadow Systems multi-optic cut (MR920, DR920, XR920)direct — no adapter$60–150
Shadow Systems MR920Build sheetShadow Systems multi-optic cut (MR920, DR920, XR920)direct — no adapter$60–150
Shadow Systems MR920 Elite / CombatBuild sheetShadow Systems multi-optic cut (MR920, DR920, XR920)direct — no adapter$60–150
Shadow Systems XR920 / XR920PBuild sheetShadow Systems multi-optic cut (MR920, DR920, XR920)direct — no adapter$60–150
Springfield Armory EchelonBuild sheetSpringfield Echelon VISdirect — no adapter$60–150
Springfield Armory Echelon 4.0CBuild sheetSpringfield Echelon VISdirect — no adapter$60–150
Springfield Armory Echelon Compact 4.5CBuild sheetSpringfield Echelon VISdirect — no adapter$60–150
Plate in the box — 21
Canik METE SFBuild sheetCanik METE optic cut (RMSc plus RMRcc or RMR)in-box plate: Canik interface 01 or 02 → RMSc$60–150
Canik METE SFTBuild sheetCanik METE optic cut (RMSc plus RMRcc or RMR)in-box plate: Canik interface 01 or 02 → RMSc$60–150
Canik METE SFT ProBuild sheetCanik METE optic cut (RMSc plus RMRcc or RMR)in-box plate: Canik interface 01 or 02 → RMSc$60–150
Canik METE SFxBuild sheetCanik METE optic cut (RMSc plus RMRcc or RMR)in-box plate: Canik interface 01 or 02 → RMSc$60–150
Canik SFx Rival / Rival-SBuild sheetCanik SFx Rival optic interface platesin-box plate: Canik interface R04 → RMSc / DeltaPoint Pro$60–150
Canik TP9 SFxBuild sheetCanik TP9 SFx optic interface platesin-box plate: Canik interface 04 → RMSc / DeltaPoint Pro$60–150
Canik TTI CombatBuild sheetCanik TTI Combat optic interface platesin-box plate: Canik interface 01 or 02 → RMSc$60–150
Canik TTI Combat MasterBuild sheetCanik TTI Combat optic interface platesin-box plate: Canik interface 01 or 02 → RMSc$60–150
FN 509 CC EdgeBuild sheetFN MRD plate systemin-box plate: FN MRD → RMSc$60–150
FN 509 LS EdgeBuild sheetFN MRD plate systemin-box plate: FN MRD → RMSc$60–150
FN 509 Midsize MRD / Compact MRDBuild sheetFN MRD plate systemin-box plate: FN MRD → RMSc$60–150
FN 509 MRD / TacticalBuild sheetFN MRD plate systemin-box plate: FN MRD → RMSc$60–150
FN 510 / 545 MRDBuild sheetFN MRD plate systemin-box plate: FN MRD → RMSc$60–150
Smith & Wesson M&P Carry CompBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P CompetitorBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P10mm M2.0 Optics ReadyBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P9 C.O.R.E. (pre-M2.0)Build sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P9 M2.0 Compact Optics ReadyBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P9 M2.0 MetalBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson M&P9 M2.0 Optics Ready (4.25 / 4.6 / 5 in)Build sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Smith & Wesson Performance Center M&P9 M2.0 Metal / Spec SeriesBuild sheetS&W M&P C.O.R.E. / Optics Readyin-box plate: C.O.R.E. Plate 2 (Shield / RMSc family)$60–150
Plate to buy — 63
Arex Delta Gen.2Build sheetArex Delta Gen.2 plate systemplate: Delta Gen.2 optic plate — type 5$85–210
Arex Zero 1 TacticalBuild sheetArex Zero 1 Tactical ROR plate systemplate: Zero 1 Tactical ROR plate — Shield / JPoint$85–210
Beretta 92 GTSBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta 92FS X Performance ORBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta 92X / 92XI / 92XI SAOBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta 92X RDOBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta 92XI SqualoBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta 94X PerformanceBuild sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Beretta APX A1 CompactBuild sheetBeretta APX A1 / APX RDO plate systemplate: Universal type F$85–210
Beretta APX A1 Full SizeBuild sheetBeretta APX A1 / APX RDO plate systemplate: Universal type F$85–210
Beretta APX RDOBuild sheetBeretta APX A1 / APX RDO plate systemplate: Universal type F$85–210
Beretta M9A4Build sheetBeretta 92X / M9A4 plate systemplate: Universal type A$85–210
Canik TP9 Elite SCBuild sheetCanik TP9 Elite SC optic interfaceplate: Canik interface → RMSc$85–210
CZ 75 / SP-01 / Shadow 2 (non-OR)Build sheetRear-sight dovetail mountplate: Dovetail mount → Shield RMSc$95–235
CZ P-07 / P-09 (standard, no optic cut)Build sheetRear-sight dovetail mountplate: Dovetail mount → Shield RMSc$95–235
CZ P-10 C Optics ReadyBuild sheetCZ P-10 OR plate systemplate: P-10 OR → RMSc / Holosun K$120–245
CZ P-10 F Optics ReadyBuild sheetCZ P-10 OR plate systemplate: P-10 OR → RMSc / Holosun K$120–245
CZ P-10 S Optics ReadyBuild sheetCZ P-10 OR plate systemplate: P-10 OR → RMSc / Holosun K$120–245
CZ Shadow 2 Compact Optics ReadyBuild sheetCZ Shadow 2 OR plate systemplate: Shadow 2 OR → RMSc / Holosun K$120–245
CZ Shadow 2 Optics ReadyBuild sheetCZ Shadow 2 OR plate systemplate: Shadow 2 OR → RMSc / Holosun K$120–245
GLOCK 17 / 19 / 34 Gen4 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 17 / 19 / 45 Gen6 (ORS)Build sheetGLOCK Gen6 ORSplate: Gen 6 MIL/LEO → Holosun 407K / 507K / SIG ROMEOZero / Olight Osight K, S$120–245
GLOCK 17 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 19 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 19X MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 22 / 23 Gen5 MOS (.40)Build sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 26 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 34 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 35 Gen5 MOS (.40)Build sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 44 MOS (.22 LR)Build sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 45 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 47 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
GLOCK 49 Gen5 MOSBuild sheetGLOCK MOS — standard & full sizeplate: V4 MIL/LEO (one SKU per footprint)$85–210
Heckler & Koch SFP9 OR (European VP9)Build sheetHK VP9 / SFP9 OR plate systemplate: VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)$85–210
Heckler & Koch VP9 Match ORBuild sheetHK VP9 / SFP9 OR plate systemplate: VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)$85–210
Heckler & Koch VP9 Optics ReadyBuild sheetHK VP9 / SFP9 OR plate systemplate: VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)$85–210
Heckler & Koch VP9SK Optics ReadyBuild sheetHK VP9 / SFP9 OR plate systemplate: VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)$85–210
Kimber KDS9cBuild sheetKimber KDS9c plate systemplate: KDS9c → RMSc / Holosun K (incl. rear sight)$85–210
Kimber R7 MakoBuild sheetKimber R7 Mako plate systemplate: R7 Mako → Shield RMSc$85–210
Rost Martin RM1CBuild sheetRost Martin metal optic plate systemplate: Shield RMS / SMS metal optic plate$85–210
Rost Martin RM1SBuild sheetPlate system — fitment not publishedplate: Ask the maker → RMSc family$85–210
Ruger American Pistol CompetitionBuild sheetPlate system — fitment not publishedplate: Ask the maker → RMSc family$85–210
Springfield Armory 1911 DS Operator AOSBuild sheetSpringfield AOSplate: AOS → RMSc$85–210
Springfield Armory Prodigy (1911 DS)Build sheetSpringfield AOSplate: AOS → RMSc$85–210
Springfield Armory XD-M Elite OSPBuild sheetSpringfield AOSplate: AOS → RMSc$85–210
Staccato C2Build sheetStaccato / 2011 optic plate systemplate: Staccato → ROMEOZero / JPoint / Shield RMSc$120–245
Staccato PBuild sheetStaccato / 2011 optic plate systemplate: Staccato → ROMEOZero / JPoint / Shield RMSc$120–245
Staccato XCBuild sheetStaccato / 2011 optic plate systemplate: Staccato → ROMEOZero / JPoint / Shield RMSc$120–245
Staccato XLBuild sheetStaccato / 2011 optic plate systemplate: Staccato → ROMEOZero / JPoint / Shield RMSc$120–245
Taurus G3 TORO / G3X TOROBuild sheetTaurus T.O.R.O. plate systemplate: T.O.R.O. Plate #4$73–175
Taurus G3C TORO / G3X TOROBuild sheetTaurus T.O.R.O. plate systemplate: T.O.R.O. Plate #4$73–175
Walther PDP 2.0 CompactBuild sheetWalther PDP 2.0 optic cutplate: PDP 2.0 → Shield RMSc$85–210
Walther PDP 2.0 Full SizeBuild sheetWalther PDP 2.0 optic cutplate: PDP 2.0 → Shield RMSc$85–210
Walther PDP Compact (1.0)Build sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP Compact F-SeriesBuild sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP F-SeriesBuild sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP Full Size (1.0)Build sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP ProBuild sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP Pro SDBuild sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther PDP Steel FrameBuild sheetWalther PDP 1.0 optic cutplate: PDP 1.0 → RMSc$85–210
Walther Q4 SF Optics ReadyBuild sheetWalther Q4 SF / Q5 Match SF optic cutplate: Universal type A$85–210
Walther Q5 Match SFBuild sheetWalther Q4 SF / Q5 Match SF optic cutplate: Universal type A$85–210
Walther WMPBuild sheetPlate system — fitment not publishedplate: Ask the maker → RMSc family$85–210
No fit — 35
1911 / 2011 Non-optics-ready slideNo factory optic provisionno known route—
Any pistol No factory optic cut — custom mill requiredNo factory optic provisionno known route—
Beretta 80X CheetahBeretta 80X Cheetah plate systemno known route—
Beretta 92FS / M9 (no optic cut)No factory optic provisionno known route—
CZ P-07 NocturneCZ Nocturne direct cutno known route—
CZ P-09 Nocturne / P-09C NocturneCZ Nocturne direct cutno known route—
GLOCK 17 / 19 (non-MOS, no optic cut)No factory optic provisionno known route—
GLOCK 17 / 19 / 45 Gen6 A-CutAimpoint A-Cutno known route—
GLOCK 20 Gen5 MOS (10 mm)GLOCK MOS — 10 mm / .45 framesno known route—
GLOCK 21 Gen5 MOS (.45)GLOCK MOS — 10 mm / .45 framesno known route—
GLOCK 40 MOS (10 mm)GLOCK MOS — 10 mm / .45 framesno known route—
GLOCK 41 MOS (.45)GLOCK MOS — 10 mm / .45 framesno known route—
Palmetto State Armory Dagger Full Size / Compact (RMR cut)PSA Dagger RMR cutno known route—
SIG Sauer P226 / P229 (non-RX, no optic cut)No factory optic provisionno known route—
SIG Sauer P226 / P229 Legion RXSIG Romeo1 cut (P226 / P229 RX Legion)no known route—
SIG Sauer P320 AXG Legion / AXG ProSIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320 Full-Size / Carry (SIG-LOC PRO slide)SIG-LOC PRO slide — P320no known route—
SIG Sauer P320 Spectre CompSIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320 X-CarrySIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320 XCompactSIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320 XFive LegionSIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320 XTenSIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320-M17 / M18SIG P320 optic cut (Romeo1Pro pattern)no known route—
SIG Sauer P320-M17 / M18 (SIG-LOC slide)SIG-LOC slide — M17 / M18no known route—
SIG Sauer P365X / P365-XL / P365-AXG Legion (SIG-LOC slide)SIG-LOC slide — P365no known route—
Smith & Wesson M&P EqualizerS&W Equalizer optic cutno known route—
Smith & Wesson M&P Shield M2.0 Optics ReadyS&W M&P Shield M2.0 optics-ready cutno known route—
Smith & Wesson M&P9 M2.0 (non-OR, no optic cut)No factory optic provisionno known route—
Smith & Wesson M&P9 M2.0 Metal with Aimpoint ACRO CutS&W M&P ACRO direct cutno known route—
Springfield Armory 1911 DS Prodigy 4.25in COAAimpoint A-Cutno known route—
Springfield Armory 1911 Operator .45 COAAimpoint A-Cutno known route—
Springfield Armory 1911 TRP .45 COAAimpoint A-Cutno known route—
Springfield Armory Echelon 4.0C COAAimpoint A-Cutno known route—
Springfield Armory Echelon 4.0FC COAAimpoint A-Cutno known route—
Springfield Armory Echelon 4.5F COAAimpoint A-Cutno known route—

Already own it?

Taking it from one pistol to another? What changes on each kind of slide: the plate, the screw thread at each joint, torque and thread traps.

Build one

Open the fit checker with this optic selected, or click any "how it mounts" cell above for that pairing's verdict and build sheet.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.