What red dots fit the Taurus G3C TORO / G3X TORO?
Page last updated . Data compiled September 2026 by Andrew Terrebonne.
58 of the 77 optics tracked here mount to this slide. This slide uses Taurus T.O.R.O. plate system.
No plate neededPlate neededDoesn’t fit
Mount systemTaurus T.O.R.O. plate system
Optics that fit58 of 77
No plate needed0
Plate to buy58
Plate to slideper plate instructions
New to red dots? What footprint, plate, co-witness and the rest mean
Verify this onePublished fitment data for this slide is thin or
conflicting. Taurus doesn't publish a plate chart; each plate's footprint is listed on its own parts-store page. The mapping below comes from those listings, checked against other sources. The flag is for plate #4: two sources confirm it for the DeltaPoint Pro, but only the Taurus listing says it takes the Shield RMS / RMSc. Confirm before ordering plate #4 for an RMSc optic. Confirm with the plate maker before ordering.
Cheapest ways to mount it
Same slide cutThe Taurus G3 TORO / G3X TORO shares this slide's optic cut
(Taurus T.O.R.O. plate system), so the optics, plates and screws below are the same for
both. What differs between the models is under "On this model", where there is anything.
Every optic, and how it mounts
Adapter plates for the Taurus G3C TORO / G3X TORO
| Plate | Gives you | Source | Price |
|---|---|---|---|
| T.O.R.O. Plate #1Vortex Venom / Viper, Burris FastFire, Docter / Noblex | Docter / Noblex | Taurus factory | $13–25 |
| T.O.R.O. Plate #2Trijicon RMR / SRO, Holosun 407C / 507C / 508T, Ameriglo Haven, Swampfox Kingslayer / Liberty / Justice, Riton X3 Tactix PRD. Taurus states this plate will not take the smaller 407K / 507K or EPS Carry. | Trijicon RMR | Taurus factory | $13–25 |
| T.O.R.O. Plate #3C-More STS2 | C-More RTS2 / STS2 | Taurus factory | $13–25 |
| T.O.R.O. Plate #4Leupold DeltaPoint Pro. The Taurus listing also names Shield RMS / RMSc / SMS, SIG RomeoZero and JPoint on this plate — that half is single-sourced, so confirm it before buying for an RMSc optic. | Leupold DeltaPoint Pro Shield RMSc | Taurus factory | $13–25 |
| T.O.R.O. Mounting Plate Kit #1–#4All four plates with screws. Cheaper than buying two singly. | Docter / Noblex Trijicon RMR C-More RTS2 / STS2 Leupold DeltaPoint Pro Shield RMSc | Taurus factory ↗ | $25–60 |
| T.O.R.O. → Docter / Venom / Viper / FastFire | Docter / Noblex | Taurus factory ↗ | $25–60 |
| T.O.R.O. → Holosun 407K / 507KSold by Taurus as a C&H part | Holosun K | C&H Precision ↗ | $25–60 |
| T.O.R.O. → Holosun EPS / EPS CarrySold by Taurus as a C&H part | Holosun K | C&H Precision | $25–60 |
GuidesSuppressor-height sights: will your irons co-witness? · Installing a red dot: what the makers say
Check a specific pairing
Open the fit checker with this pistol selected, or click any "how it mounts" cell above for that pairing's verdict and build sheet.
Deciding between a few? Compare 3 popular optics on this slide side by side: window, weight, emitter, cost to mount and co-witness.
Something on this page wrong?
Tell us what it should be, and include a source: nothing changes without one.