Home / Optics / ADE Delta Pro

What pistols fit the ADE Delta Pro?

Page last updated October 1, 2026. Data compiled September 2026 by Andrew Terrebonne.

It uses the Trijicon RMR footprint and mounts to 93 of the 178 slides tracked here, 11 of them with no adapter plate. An open-emitter optic.

No plate neededPlate neededDoesn’t fit

Pistols that fit93 of 178

No plate to buy45

Plate to buy48

FootprintTrijicon RMR

EmitterOpen

Screws (footprint)#6-32

Torque (footprint)15 in-lb

Street price$60–150

No plate to buy counts the direct mounts plus the pairings whose plate normally comes in the pistol's or the optic's box. Box contents change between production runs, so check yours before counting on it.

Same slides, different optics

17 other optics on the Trijicon RMR footprint go on the same slides as the ADE Delta Pro, so the table below answers for them too. What tells them apart:

Optic	Emitter	Window	Weight	Battery	Dot
ADE Delta Pro	Open	not published here	not published here	not published here	not published here
Trijicon RMR Type 2	Open	22 × 16 mm	1.2 oz	CR2032, bottom-load	1.0 / 3.25 / 6.5 MOA
Trijicon RMR HD	Open	21.6 × 16.2 mm	1.69 oz	CR2032, top-load	1.0 / 3.25 MOA + 55 MOA circle
Trijicon SRO	Open	25 × 22.5 mm, round with a flat bottom	1.6 oz	CR2032, top-load	1.0 / 2.5 / 5.0 MOA
Holosun 507C X2	Open	23.1 × 16.0 mm	1.5 oz	CR1632, side-load	2 MOA + 32 MOA circle
Holosun 407C X2	Open	23.1 × 16.0 mm	1.5 oz	CR1632, side-load	2 MOA

Optic

Emitter

Window

Weight

Battery

Dot

ADE Delta Pro

Open

not published here

Trijicon RMR Type 2

Open

22 × 16 mm

1.2 oz

CR2032, bottom-load

1.0 / 3.25 / 6.5 MOA

Trijicon RMR HD

Open

21.6 × 16.2 mm

1.69 oz

CR2032, top-load

1.0 / 3.25 MOA + 55 MOA circle

Trijicon SRO

Open

25 × 22.5 mm, round with a flat bottom

1.6 oz

CR2032, top-load

1.0 / 2.5 / 5.0 MOA

Holosun 507C X2

Open

23.1 × 16.0 mm

1.5 oz

CR1632, side-load

2 MOA + 32 MOA circle

Holosun 407C X2

Open

23.1 × 16.0 mm

1.5 oz

CR1632, side-load

2 MOA

All 18 Trijicon RMR optics

Sight co-witnessDepends on your front sight height, which can vary by SKU and production run within one model. Standard-height irons: no co-witness. Suppressor-height irons: normally a lower-third co-witness on a direct cut. Mounted directly, the optic sits as low as the cut allows, the best case for a co-witness. That's the typical case for this kind of optic, not a guarantee: pistols don't standardize sight and optic heights the way rifles do.

Trijicon RMR footprintDeepest optic selection of any footprint. Not interchangeable with the RMRcc despite the shared brand. The enclosed RCR shares the screw pattern and goes on an RMR cut, but takes its own version of a plate.

GuidesSuppressor-height sights: will your irons co-witness? · Installing a red dot: what the makers say · Zeroing a red dot for the first time · Red dot lost zero? Troubleshooting the mount

Simplest slides to mount it on

No plate needed$60–150Springfield Armory Echelondirect — no adapter10 other slides also take it with no plateBuild sheet

Plate already in the box$60–150GLOCK 19 Gen5 MOSin-box plate: MOS Plate 02All 45 with no plate to buyBuild sheet

Cheapest plate to buy$73–175Taurus G3 TORO / G3X TOROplate: T.O.R.O. Plate #2Every slide it fits, cheapest firstBuild sheet

Cost to mount is the optic plus the cheapest plate that fits, in approximate street-price bands from September 2026, for comparing routes. Pistols aren't priced, so when slides tie, the card names the most popular one.

Every pistol, and how it mounts

Item	Slide cut	How it mounts	Cost to mount
Direct — 11
Palmetto State Armory Dagger Full Size / Compact (RMR cut)Build sheet	PSA Dagger RMR cut	direct — no adapter	$60–150
Ruger RXM Build sheet	Ruger RXM direct-mount optic cut (RMR, DPP, RMSc)	direct — no adapter	$60–150
Ruger RXM Compact Build sheet	Ruger RXM direct-mount optic cut (RMR, DPP, RMSc)	direct — no adapter	$60–150
Shadow Systems DR920 / DR920P Build sheet	Shadow Systems multi-optic cut (MR920, DR920, XR920)	direct — no adapter	$60–150
Shadow Systems Foundation Series Build sheet	Shadow Systems multi-optic cut (MR920, DR920, XR920)	direct — no adapter	$60–150
Shadow Systems MR920 Build sheet	Shadow Systems multi-optic cut (MR920, DR920, XR920)	direct — no adapter	$60–150
Shadow Systems MR920 Elite / Combat Build sheet	Shadow Systems multi-optic cut (MR920, DR920, XR920)	direct — no adapter	$60–150
Shadow Systems XR920 / XR920P Build sheet	Shadow Systems multi-optic cut (MR920, DR920, XR920)	direct — no adapter	$60–150
Springfield Armory Echelon Build sheet	Springfield Echelon VIS	direct — no adapter	$60–150
Springfield Armory Echelon 4.0C Build sheet	Springfield Echelon VIS	direct — no adapter	$60–150
Springfield Armory Echelon Compact 4.5C Build sheet	Springfield Echelon VIS	direct — no adapter	$60–150
Plate in the box — 34
Canik SFx Rival / Rival-S Build sheet	Canik SFx Rival optic interface plates	in-box plate: Canik interface R02 → RMR	$60–150
Canik TP9 SFx Build sheet	Canik TP9 SFx optic interface plates	in-box plate: Canik interface 02 → RMR	$60–150
Canik TTI Combat Build sheet	Canik TTI Combat optic interface plates	in-box plate: Canik interface 03 → RMR	$60–150
Canik TTI Combat Master Build sheet	Canik TTI Combat optic interface plates	in-box plate: Canik interface 03 → RMR	$60–150
FN 509 CC Edge Build sheet	FN MRD plate system	in-box plate: FN MRD → RMR	$60–150
FN 509 LS Edge Build sheet	FN MRD plate system	in-box plate: FN MRD → RMR	$60–150
FN 509 Midsize MRD / Compact MRD Build sheet	FN MRD plate system	in-box plate: FN MRD → RMR	$60–150
FN 509 MRD / Tactical Build sheet	FN MRD plate system	in-box plate: FN MRD → RMR	$60–150
FN 510 / 545 MRD Build sheet	FN MRD plate system	in-box plate: FN MRD → RMR	$60–150
GLOCK 17 / 19 / 34 Gen4 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 17 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 19 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 19X MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 20 Gen5 MOS (10 mm)Build sheet	GLOCK MOS — 10 mm / .45 frames	in-box plate: MOS Plate 06	$60–150
GLOCK 21 Gen5 MOS (.45)Build sheet	GLOCK MOS — 10 mm / .45 frames	in-box plate: MOS Plate 06	$60–150
GLOCK 22 / 23 Gen5 MOS (.40)Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 26 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 34 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 35 Gen5 MOS (.40)Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 40 MOS (10 mm)Build sheet	GLOCK MOS — 10 mm / .45 frames	in-box plate: MOS Plate 06	$60–150
GLOCK 41 MOS (.45)Build sheet	GLOCK MOS — 10 mm / .45 frames	in-box plate: MOS Plate 06	$60–150
GLOCK 44 MOS (.22 LR)Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 45 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 47 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
GLOCK 49 Gen5 MOS Build sheet	GLOCK MOS — standard & full size	in-box plate: MOS Plate 02	$60–150
Rost Martin RM1C Build sheet	Rost Martin metal optic plate system	in-box plate: RMR footprint optic plate kit	$60–150
Smith & Wesson M&P Carry Comp Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P Competitor Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P10mm M2.0 Optics Ready Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P9 C.O.R.E. (pre-M2.0)Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P9 M2.0 Compact Optics Ready Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P9 M2.0 Metal Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson M&P9 M2.0 Optics Ready (4.25 / 4.6 / 5 in)Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Smith & Wesson Performance Center M&P9 M2.0 Metal / Spec Series Build sheet	S&W M&P C.O.R.E. / Optics Ready	in-box plate: C.O.R.E. Plate 1 (RMR family)	$60–150
Plate to buy — 48
Arex Delta Gen.2 Build sheet	Arex Delta Gen.2 plate system	plate: Delta Gen.2 optic plate — type 2	$85–210
Arex Zero 1 Tactical Build sheet	Arex Zero 1 Tactical ROR plate system	plate: Zero 1 Tactical ROR plate — Trijicon	$85–210
Beretta 92 GTS Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta 92FS X Performance OR Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta 92X / 92XI / 92XI SAO Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta 92X RDO Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta 92XI Squalo Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta 94X Performance Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
Beretta APX A1 Compact Build sheet	Beretta APX A1 / APX RDO plate system	plate: APX A1 / RDO → Trijicon RMR	$85–210
Beretta APX A1 Full Size Build sheet	Beretta APX A1 / APX RDO plate system	plate: APX A1 / RDO → Trijicon RMR	$85–210
Beretta APX RDO Build sheet	Beretta APX A1 / APX RDO plate system	plate: APX A1 / RDO → Trijicon RMR	$85–210
Beretta M9A4 Build sheet	Beretta 92X / M9A4 plate system	plate: 92X / M9A4 → Trijicon RMR	$85–210
CZ 75 / SP-01 / Shadow 2 (non-OR)Build sheet	Rear-sight dovetail mount	plate: Dovetail mount → RMR / C-More / Docter (type C)	$95–235
CZ P-07 / P-09 (standard, no optic cut)Build sheet	Rear-sight dovetail mount	plate: Dovetail mount → RMR / C-More / Docter (type C)	$95–235
CZ P-10 C Optics Ready Build sheet	CZ P-10 OR plate system	plate: P-10 OR → RMR	$120–245
CZ P-10 F Optics Ready Build sheet	CZ P-10 OR plate system	plate: P-10 OR → RMR	$120–245
CZ P-10 S Optics Ready Build sheet	CZ P-10 OR plate system	plate: P-10 OR → RMR	$120–245
CZ Shadow 2 Compact Optics Ready Build sheet	CZ Shadow 2 OR plate system	plate: Shadow 2 OR → RMR	$120–245
CZ Shadow 2 Optics Ready Build sheet	CZ Shadow 2 OR plate system	plate: Shadow 2 OR → RMR	$120–245
Rost Martin RM1S Build sheet	Plate system — fitment not published	plate: Ask the maker → RMR family	$85–210
Ruger American Pistol Competition Build sheet	Plate system — fitment not published	plate: Ask the maker → RMR family	$85–210
SIG Sauer P226 / P229 Legion RX Build sheet	SIG Romeo1 cut (P226 / P229 RX Legion)	plate: Romeo1 → RMR / Holosun	$85–210
SIG Sauer P320 AXG Legion / AXG Pro Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320 Spectre Comp Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320 X-Carry Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320 XCompact Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320 XFive Legion Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320 XTen Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
SIG Sauer P320-M17 / M18 Build sheet	SIG P320 optic cut (Romeo1Pro pattern)	plate: P320 → RMR / SRO / RCR / Holosun C	$85–210
Springfield Armory 1911 DS Operator AOS Build sheet	Springfield AOS	plate: AOS → RMR / SRO	$85–210
Springfield Armory Prodigy (1911 DS)Build sheet	Springfield AOS	plate: AOS → RMR / SRO	$85–210
Springfield Armory XD-M Elite OSP Build sheet	Springfield AOS	plate: AOS → RMR / SRO	$85–210
Taurus Defender 856 TORO Build sheet	Taurus 856 T.O.R.O. revolver cut	plate: Taurus 856 → RMR / SRO / Holosun 407C / 507C / 507Comp / 508T	$85–210
Taurus G3 TORO / G3X TORO Build sheet	Taurus T.O.R.O. plate system	plate: T.O.R.O. Plate #2	$73–175
Taurus G3C TORO / G3X TORO Build sheet	Taurus T.O.R.O. plate system	plate: T.O.R.O. Plate #2	$73–175
Taurus Judge TORO / Raging Hunter Build sheet	Taurus Judge T.O.R.O. revolver cut	plate: Taurus Judge T.O.R.O. → RMR / RMR HD / SRO / Holosun 407C / 507C / 507Comp / 508T	$85–210
Walther PDP 2.0 Compact Build sheet	Walther PDP 2.0 optic cut	plate: PDP 2.0 → Trijicon RMR	$85–210
Walther PDP 2.0 Full Size Build sheet	Walther PDP 2.0 optic cut	plate: PDP 2.0 → Trijicon RMR	$85–210
Walther PDP Compact (1.0)Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP Compact F-Series Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP F-Series Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP Full Size (1.0)Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP Pro Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP Pro SD Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther PDP Steel Frame Build sheet	Walther PDP 1.0 optic cut	plate: PDP Gen1 optic plate, RMR footprint (2844079)	$85–210
Walther Q4 SF Optics Ready Build sheet	Walther Q4 SF / Q5 Match SF optic cut	plate: Q-series → Trijicon RMR	$85–210
Walther Q5 Match SF Build sheet	Walther Q4 SF / Q5 Match SF optic cut	plate: Q-series → Trijicon RMR	$85–210
Walther WMP Build sheet	Plate system — fitment not published	plate: Ask the maker → RMR family	$85–210
No fit — 85
1911 / 2011 Non-optics-ready slide	No factory optic provision	no known route	—
Any pistol No factory optic cut — custom mill required	No factory optic provision	no known route	—
Archon Firearms Type B / Type D OR	RMSc-pattern direct cut	no known route	—
Avidity Arms PD10	RMSc-pattern direct cut	no known route	—
Beretta 80X Cheetah	Beretta 80X Cheetah plate system	no known route	—
Beretta 92FS / M9 (no optic cut)	No factory optic provision	no known route	—
Beretta APX A1 Carry	RMSc-pattern direct cut	no known route	—
Bersa BP9CC OR	RMSc-pattern direct cut	no known route	—
Canik METE MC9 / MC9L	RMSc-pattern direct cut	no known route	—
Canik METE MC9 Prime	RMSc-pattern direct cut	no known route	—
Canik METE SF	Canik METE optic cut (RMSc plus RMRcc or RMR)	depends on serial	—
Canik METE SFT	Canik METE optic cut (RMSc plus RMRcc or RMR)	depends on serial	—
Canik METE SFT Pro	Canik METE optic cut (RMSc plus RMRcc or RMR)	depends on serial	—
Canik METE SFx	Canik METE optic cut (RMSc plus RMRcc or RMR)	depends on serial	—
Canik TP9 Elite SC	Canik TP9 Elite SC optic interface	no known route	—
CZ P-07 Nocturne	CZ Nocturne direct cut	no known route	—
CZ P-09 Nocturne / P-09C Nocturne	CZ Nocturne direct cut	no known route	—
CZ Shadow 2 Carry	CZ Shadow 2 Carry direct cut (Shield RMSc and Holosun K)	no known route	—
FN Reflex MRD	RMSc-pattern direct cut	no known route	—
Girsan Witness2311	RMSc-pattern direct cut	no known route	—
GLOCK 17 / 19 (non-MOS, no optic cut)	No factory optic provision	no known route	—
GLOCK 17 / 19 / 45 Gen6 (ORS)	GLOCK Gen6 ORS	no known route	—
GLOCK 17 / 19 / 45 Gen6 A-Cut	Aimpoint A-Cut	no known route	—
GLOCK 43X / 48 MOS-K	GLOCK Slimline MOS-K	no known route	—
GLOCK 43X / 48 Rail MOS	GLOCK Slimline MOS (43X / 48)	no known route	—
GLOCK 43X MOS	GLOCK Slimline MOS (43X / 48)	no known route	—
GLOCK 48 MOS	GLOCK Slimline MOS (43X / 48)	no known route	—
Heckler & Koch SFP9 OR (European VP9)	HK VP9 / SFP9 OR plate system	no known route	—
Heckler & Koch VP9 Match OR	HK VP9 / SFP9 OR plate system	no known route	—
Heckler & Koch VP9 Optics Ready	HK VP9 / SFP9 OR plate system	no known route	—
Heckler & Koch VP9SK Optics Ready	HK VP9 / SFP9 OR plate system	no known route	—
IWI Masada Slim	RMSc-pattern direct cut	no known route	—
Kimber KDS9c	Kimber KDS9c plate system	no known route	—
Kimber R7 Mako	Kimber R7 Mako plate system	no known route	—
Mossberg MC2sc Optic Ready	RMSc-pattern direct cut	no known route	—
Palmetto State Armory 5.7 Rock Optics Ready	RMSc-pattern direct cut	no known route	—
Palmetto State Armory Dagger Micro	RMSc-pattern direct cut	no known route	—
Rock Island Armory STK100	RMSc-pattern direct cut	no known route	—
Ruger MAX-9	RMSc-pattern direct cut	no known route	—
Ruger Ruger-5.7 Optics Ready	RMSc-pattern direct cut	no known route	—
SCCY CPX RDR / DVG-1 RDR	RMSc-pattern direct cut	no known route	—
Shadow Systems CR920 / CR920P	Shadow Systems CR920 optic cut (RMSc pattern)	no known route	—
SIG Sauer P226 / P229 (non-RX, no optic cut)	No factory optic provision	no known route	—
SIG Sauer P320 Full-Size / Carry (SIG-LOC PRO slide)	SIG-LOC PRO slide — P320	no known route	—
SIG Sauer P320-M17 / M18 (SIG-LOC slide)	SIG-LOC slide — M17 / M18	no known route	—
SIG Sauer P322 / P322 Comp	SIG P322 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365 Fuse	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365 Optics Ready	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365-380	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365-AXG Legion	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365-XMACRO / XMACRO Comp	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365X	SIG P365 optic cut (RMSc pattern)	no known route	—
SIG Sauer P365X / P365-XL / P365-AXG Legion (SIG-LOC slide)	SIG-LOC slide — P365	no known route	—
SIG Sauer P365XL	SIG P365 optic cut (RMSc pattern)	no known route	—
Smith & Wesson CSX E-Series Optics Ready	RMSc-pattern direct cut	no known route	—
Smith & Wesson M&P 22 Magnum	RMSc-pattern direct cut	no known route	—
Smith & Wesson M&P 5.7	S&W M&P 5.7 direct cut	no known route	—
Smith & Wesson M&P Equalizer	S&W Equalizer optic cut	no known route	—
Smith & Wesson M&P Shield M2.0 Optics Ready	S&W M&P Shield M2.0 optics-ready cut	no known route	—
Smith & Wesson M&P Shield Plus Carry Comp	RMSc-pattern direct cut	no known route	—
Smith & Wesson M&P Shield Plus Optics Ready	S&W M&P Shield Plus optics-ready cut	no known route	—
Smith & Wesson M&P9 M2.0 (non-OR, no optic cut)	No factory optic provision	no known route	—
Smith & Wesson M&P9 M2.0 Metal with Aimpoint ACRO Cut	S&W M&P ACRO direct cut	no known route	—
Springfield Armory 1911 DS Prodigy 4.25in COA	Aimpoint A-Cut	no known route	—
Springfield Armory 1911 Operator .45 COA	Aimpoint A-Cut	no known route	—
Springfield Armory 1911 TRP .45 COA	Aimpoint A-Cut	no known route	—
Springfield Armory Echelon 4.0C COA	Aimpoint A-Cut	no known route	—
Springfield Armory Echelon 4.0FC COA	Aimpoint A-Cut	no known route	—
Springfield Armory Echelon 4.5F COA	Aimpoint A-Cut	no known route	—
Springfield Armory Hellcat OSP	Springfield Hellcat OSP cut (Micro footprint)	no known route	—
Springfield Armory Hellcat Pro	Springfield Hellcat OSP cut (Micro footprint)	no known route	—
Springfield Armory Hellcat Pro Comp OSP	Springfield Hellcat OSP cut (Micro footprint)	no known route	—
Springfield Armory Hellcat RDP	Springfield Hellcat OSP cut (Micro footprint)	no known route	—
Springfield Armory XD-S Mod.2 OSP	RMSc-pattern direct cut	no known route	—
Staccato C2	Staccato / 2011 optic plate system	no known route	—
Staccato CS	RMSc-pattern direct cut	no known route	—
Staccato P	Staccato / 2011 optic plate system	no known route	—
Staccato XC	Staccato / 2011 optic plate system	no known route	—
Staccato XL	Staccato / 2011 optic plate system	no known route	—
Stoeger STR-9MC	RMSc-pattern direct cut	no known route	—
Taurus GX4 Carry TORO	Taurus GX4 T.O.R.O. direct cut	no known route	—
Taurus GX4 Graphene TORO	Taurus GX4 T.O.R.O. direct cut	no known route	—
Taurus GX4 TORO / GX4XL	Taurus GX4 T.O.R.O. direct cut	no known route	—
Taurus TX22 Compact	RMSc-pattern direct cut	no known route	—
Tisas Carry DS / Duty DS	RMSc-pattern direct cut	no known route	—

Already own it?

Taking it from one pistol to another? What changes on each kind of slide: the plate, the screw thread at each joint, torque and thread traps.

Build one

Open the fit checker with this optic selected, or click any "how it mounts" cell above for that pairing's verdict and build sheet.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.