What red dots fit the Heckler & Koch SFP9 OR (European VP9)?
Page last updated . Data compiled September 2026 by Andrew Terrebonne.
38 of the 77 optics tracked here mount to this slide. This slide uses HK VP9 / SFP9 OR plate system.
No plate neededPlate neededDoesn’t fit
Mount systemHK VP9 / SFP9 OR plate system
Optics that fit38 of 77
No plate needed0
Plate to buy38
Plate to slide2 Nm (17.7 in-lb, converted)
New to red dots? What footprint, plate, co-witness and the rest mean
Cheapest ways to mount it
Cheapest overall$85–210SIG Sauer ROMEOZeroplate: VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)Build sheet
Cheapest enclosed emitter$325–510Holosun EPS Carryplate: VP9 / SFP9 → Holosun EPS / EPS Carry / SCS CarryBuild sheet
Same slide cutThe Heckler & Koch VP9 Optics Ready, Heckler & Koch VP9 Match OR and Heckler & Koch VP9SK Optics Ready share this slide's optic cut
(HK VP9 / SFP9 OR plate system), so the optics, plates and screws below are the same for
all of them. What differs between the models is under "On this model", where there is anything.
How this slide mounts an opticHK sells the Optic Ready plates separately: its manual lists them as "not included with VP Optic Ready", and HK USA's VP9 Match page says the cut takes "one of five available mounting plates (sold separately)". The slide ships with a cover plate over the cut. HK's plates are numbered: its manual lists plate 01 (Meopta MeoSight III, EOTech MRDS, Noblex Sight III), 02 (Trijicon RMR, Holosun), 03 (C-More STS2), 04 (Leupold DeltaPoint) and 05 (Burris FastFire 2 and 3, Vortex Viper and Venom); HK USA's webshop adds an ACRO plate (6), a Holosun K plate that also lists the Shield RMSc, and a 509T plate. HK names optics one by one, so each of its plates is listed here for the optics it names, not for the whole footprint. C&H and EGW sell plates for more. Source: Heckler & Koch USA, VP9A1 operator's manual (plates 1 to 7 and the Holosun K and 509T plates, 2 Nm, optic screws to the optic maker's torque) ↗; Heckler & Koch USA, VP9 Match ↗; Heckler & Koch USA webshop, Optics Plate #2 for VP9 Optic Ready Models ↗.
On this modelHeckler & Koch's own SFP9 publication says the OR slide has an interface for five adapter plates, and its site says various plates are available, but neither lists them. The plates here are HK USA's for the VP9 OR and the aftermarket plates C&H and EGW list for it: ask HK before assuming they fit the SFP9.
Every optic, and how it mounts
Adapter plates for the Heckler & Koch SFP9 OR (European VP9)
| Plate | Gives you | Source | Price |
|---|---|---|---|
| HK Optics Plate #1 (50254261)HK names the Meopta MeoSight III, EOTech MRDS (not the EFLX), Noblex Sight 3 and Meprolight microRDS. Of the optics tracked here only the Noblex Sight III is on that list: the MeoSight IV is a different optic. | Docter / Noblex | HK factory ↗ | $25–60 |
| HK Optics Plate #2 (50254262)HK says "Trijicon RMR and Holosun", and not the Holosun 507K or the Trijicon RMRcc. It does not name the SRO or any other maker's RMR-pattern optic, so they are not listed here; C&H's plate names the SRO. | Trijicon RMR | HK factory ↗ | $25–60 |
| HK Optics Plate #3 (50254263)HK names the C-More STS2, not the RTS2. | C-More RTS2 / STS2 | HK factory ↗ | $25–60 |
| HK Optics Plate #4 (50254264)HK's listing says "Leupold DeltaPoint" and its VP9A1 manual says DeltaPoint Pro for the same part. HK's plate #1 listing also sends the EOTech EFLX here. | Leupold DeltaPoint Pro | HK factory ↗ | $25–60 |
| HK Optics Plate #5 (50254265)HK names the Burris FastFire 2 and 3 and the Vortex Viper and Venom; the FastFire 4 is not on its list. | Docter / Noblex | HK factory ↗ | $25–60 |
| HK ACRO plate #6 (50257961)HK's listing says "Optic plate #6 for ACRO optic" and "Fits VP9OR"; its VP9A1 manual says "Aimpoint Acro". It names no other optic. | Aimpoint ACRO | HK factory ↗ | $25–60 |
| HK Holosun K plate (51000381)HK's listing says "Holosun K optics" and "Shield RMSc". It does not name the EPS, EPS Carry or SCS Carry, which C&H's EPS plate below does. | Holosun K Shield RMSc | HK factory ↗ | $25–60 |
| HK Holosun 509T plate (51000792) | Holosun 509T | HK factory ↗ | $25–60 |
| H&K VP9 ACRO mount plate (200521)Aimpoint's own plate for the ACRO on optics-ready VP9s. Aimpoint's page could not be read this time (its site blocks automated reads), so the listing is as it was last read. | Aimpoint ACRO | Aimpoint ↗ | $60–95 |
| VP9 / SFP9 → Trijicon RMR / SRO / Holosun CC&H packs a set of 4-40 optic screws for each optic it lists, so it fits only those. It says the plate will not work with the Trijicon RCR. | Trijicon RMR | C&H Precision ↗ | $25–60 |
| VP9 / SFP9 → Leupold DPPC&H lists the Leupold DeltaPoint Pro and the EOTech EFLX. | Leupold DeltaPoint Pro | C&H Precision ↗ | $25–60 |
| VP9 / SFP9 → Holosun K / Osight SC&H sells a separate plate for the EPS family. | Holosun K Shield RMSc | C&H Precision ↗ | $25–60 |
| VP9 / SFP9 → Holosun EPS / EPS Carry / SCS CarryA separate plate from C&H's 407K / 507K one. | Holosun K | C&H Precision ↗ | $25–60 |
| VP9 / SFP9 → Aimpoint ACRO (steel)C&H names the Aimpoint ACRO, ACRO P1 and P2, its own Duty and the Colt MRS-1; not the Steiner MPS, which has its own plate below. | Aimpoint ACRO | C&H Precision ↗ | $60–95 |
| VP9 / SFP9 → Steiner MPS (steel) | Aimpoint ACRO | C&H Precision ↗ | $60–95 |
| VP9 OR → Vortex Viper / Venom / Burris FastFire (EGW)EGW says its plate is comparable to HK's plate #5 and lists the Venom, Viper and FastFire 1 to 4 among its optics. EGW says the slide's own plate screws may be reused. | Docter / Noblex | EGW ↗ | $25–60 |
| VP9 OR → Holosun K / Shield RMSc / DeltaPoint Pro / Defender (EGW)EGW says its plate is comparable to HK's plate #4. It lists the Vortex Defender series, and says the Defender XL needs the screws Vortex provides. | Holosun K Shield RMSc Leupold DeltaPoint Pro | EGW ↗ | $25–60 |
Iron sights that co-witness
Typical co-witness by optic type; figures published for this slide are below, with their source.
Sight heights published for 9 optics on this slide
- Trijicon RMR Type 2
- Night Fision · absolute · front .480 / rear .517 in
- Night Fision · lower 1/3 · front .350 / rear .387 in
- Trijicon SRO
- Night Fision · lower 1/3 · front .480 / rear .517 in
- Holosun 507C X2
- Night Fision · absolute · front .480 / rear .517 in
- Night Fision · lower 1/3 · front .350 / rear .387 in
- Holosun 407C X2
- Night Fision · absolute · front .480 / rear .517 in
- Night Fision · lower 1/3 · front .350 / rear .387 in
- Holosun 508T X2
- Night Fision · absolute · front .480 / rear .517 in
- Night Fision · lower 1/3 · front .350 / rear .387 in
- Holosun EPS
- Night Fision · absolute · front .350 / rear .387 in
- Leupold DeltaPoint Pro
- Night Fision · lower 1/3 · front .480 / rear .517 in
- Vortex Venom
- Night Fision · lower 1/3 · front .480 / rear .517 in
- Burris FastFire 3
- Night Fision · absolute · front .480 / rear .517 in
- Night Fision · lower 1/3 · front .350 / rear .387 in
Heights are front / rear in inches, as each sight maker measures its own sights. That's not a deck height, and it doesn't compare across makers to the thousandth. Absolute puts the front sight level with the dot; lower 1/3 and lower 1/5 sit it lower in the window. A sight maker sells a handful of fixed heights, so optics of similar height share one set: the same figures under two optics are the maker's chart saying so, not a copy.
Night Fision — co-witness chart for HK (not split by model) ↗
GuidesSuppressor-height sights: will your irons co-witness? · Installing a red dot: what the makers say
Check a specific pairing
Open the fit checker with this pistol selected, or click any "how it mounts" cell above for that pairing's verdict and build sheet.
Deciding between a few? Compare 3 popular optics on this slide side by side: window, weight, emitter, cost to mount and co-witness.
Something on this page wrong?
Tell us what it should be, and include a source: nothing changes without one.