Home / Pistols / Ruger RXM / Holosun EPS Carry

Does the Holosun EPS Carry fit the Ruger RXM?

No, the Holosun EPS Carry does not fit the Ruger RXM: the slide is not cut for the Holosun K footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the Ruger RXM direct-mount optic cut (RMR, DPP, RMSc) interface to the Holosun K pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Ruger RXM Compact either: it shares this slide's optic cut.
SlideRuger RXM direct-mount optic cut (RMR, DPP, RMSc)
Optic footprintHolosun K
Slide is cut forTrijicon RMR, Leupold DeltaPoint Pro, Shield RMSc
Plates made for itTrijicon RMR, Holosun K
On this modelSix distributor-exclusive models (catalog 19461 to 19466) are cut for the Aimpoint A-Cut, not the RMR, DeltaPoint Pro and RMSc pattern this page describes: check the catalog number.
How this slide mounts an opticThe slide is machined for direct mounting of optics on three patterns: the Trijicon RMR, the Leupold DeltaPoint Pro and the Shield RMSc. Ruger supplies an envelope of small dowel pins with the pistol, two for an RMR-pattern optic and four for a DeltaPoint Pro or RMSc one, and says to mount an optic only with the pins in. The optic's own screws are used, to the optic maker's torque: 6-32 for the RMR pattern, M4 × 0.7 for the other two. Two screws hold the cover over the cut; Ruger says to put them back at 15 in-lb if the optic comes off. Six distributor-exclusive 4-inch models (catalog numbers 19461 to 19466) are cut for the Aimpoint A-Cut instead, which this system does not describe. Ruger fits co-witness-height sights at the factory. The Holosun K optics are not on Ruger's list and need a plate.
About this opticEnclosed emitter in a carry-size body.

What fits the Ruger RXM instead

44 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150Cyelee Cat / Wolfdirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 44 optics that fit it

Where the Holosun EPS Carry does go

It mounts to 139 of the 178 pistols tracked here, 51 of them with no adapter plate. The popular ones:

All 139 pistols it fits

Sources for this page (4)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Holosun EPS Carry: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Ruger RXM’s slide: the direct-mount patterns, dowel pins, thread by pattern and the plates the maker does not sell checked against Ruger's RXM manual and models page, and C&H Precision's own RXM listings on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.