Does the Steiner MPS fit the Walther PDP Full Size (1.0)?

No, the Steiner MPS does not fit the Walther PDP Full Size (1.0): the slide is not cut for the Aimpoint ACRO footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the Walther PDP 1.0 optic cut interface to the Aimpoint ACRO pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Walther PDP Compact (1.0), Walther PDP F-Series, Walther PDP Pro SD, Walther PDP Pro, Walther PDP Steel Frame and Walther PDP Compact F-Series either: they share this slide's optic cut.
SlideWalther PDP 1.0 optic cut
Optic footprintAimpoint ACRO
Slide is cut forno footprint — plates only
Plates made for itTrijicon RMR, Docter / Noblex, Leupold DeltaPoint Pro, Shield RMSc, Aimpoint ACRO, Holosun K, Holosun 509T
How this slide mounts an opticWalther sells its own plates for this cut (its "Gen1" plates, for the flat-bottomed cut), and C&H makes more. PDP 1.0 and PDP 2.0 plates are not interchangeable, so confirm which slide you have before ordering. Source: Walther Arms, PDP Gen1 Optic Plate, RMR (Generation 1 Optic Cut, flat bottom) ↗; Walther Arms, PDP Gen2 Optic Plate, Doctor (Generation 2 Optic Cut, lug bottom) ↗.
About this opticLarger window than the ACRO on the same clamp interface.

What fits the Walther PDP Full Size (1.0) instead

59 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$85–210Cyelee Cat / Wolfplate: PDP Gen1 optic plate, RMR footprint (2844079)Build sheet
Cheapest enclosed emitter$325–510Holosun EPS-COREplate: PDP 1.0 → RMScBuild sheet

Popular optics that do fit it:

All 59 optics that fit it

Where the Steiner MPS does go

It mounts to 77 of the 178 pistols tracked here, 1 of them with no adapter plate. The popular ones:

All 77 pistols it fits

Sources for this page (4)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Steiner MPS: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Walther PDP Full Size (1.0)’s slide: the plate screw thread and torque, and the cut's name checked against Carl Walther's PDP manual and Walther Arms' Gen 1 and Gen 2 plate listings on September 30, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.