Home / Optics / C-More RTS2 / Moving it between pistols

Moving the C-More RTS2 between pistols

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

You already own it. Here is what changes from one slide to the next: the plate, the screw thread at each joint, the torque, the tools and any thread trap. 13 kinds of slide, covering 47 pistols, grouped by how the optic mounts and then alphabetically. Nothing is ranked. The C-More RTS2 page has its specs and the per-pair answers.

11 of the 13 blocks have a figure marked not on file: no maker publishes it where this site could find it, so the plate maker or a gunsmith is the source. How the data is checked.

Mounts on a plate

Arex Zero 1 Tactical ROR plate system

Plate Adapter plate required

Slide: Arex Zero 1 Tactical

Plate
Zero 1 Tactical ROR plate — C-MoreAftermarket
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$325–510approximate street prices, September 2026

Beretta 92X / M9A4 plate system

Plate Adapter plate required

7 slides: Beretta 92X RDO, Beretta 92X / 92XI / 92XI SAO, Beretta 92XI Squalo, Beretta 92 GTS, Beretta M9A4, Beretta 92FS X Performance OR, Beretta 94X Performance

Plate
92X / M9A4 → C-More RTSBeretta factory; 1 other plate on the pair pages
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$325–510approximate street prices, September 2026

Canik SFx Rival optic interface plates

Plate Fits on the plate in the box

Slide: Canik SFx Rival / Rival-S

Plate
Canik interface R06 → C-More RTS2Canik factory, ships with the pistol
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereLook in the pistol's box, with the plates. If there are none, buy a pair made for this plate.
Plate torque
per plate maker, not on file here
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$300–450approximate street prices, September 2026

CZ P-10 OR plate system

Plate Adapter plate required

3 slides: CZ P-10 C Optics Ready, CZ P-10 F Optics Ready, CZ P-10 S Optics Ready

Plate
P-10 OR → C-More RTSCZ factory
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
1.3 Nm (11.5 in-lb)
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$360–545approximate street prices, September 2026

CZ Shadow 2 OR plate system

Plate Adapter plate required

2 slides: CZ Shadow 2 Optics Ready, CZ Shadow 2 Compact Optics Ready

Plate
Shadow 2 OR → C-More RTSCZ factory
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$360–545approximate street prices, September 2026

GLOCK Gen6 ORS

Plate Fits on the plate in the box

Slide: GLOCK 17 / 19 / 45 Gen6 (ORS)

Plate
ORS Plate 03GLOCK factory, ships with the pistol
Plate → slide
None: the plate has no screws of its ownNone: GLOCK's sheet has you seat the polymer plate in the slide and fit the optic through it. It says not to reuse the cover-plate screws to hold a plate.
Optic → plate
8-32 UNC (into the slide, through the plate)Not in GLOCK's plate set. GLOCK's manual says to use the optic maker's own mounting screws.
Plate torque
None: GLOCK gives no plate screws or torque
Optic torque
per optic manual (GLOCK gives no figure)
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$300–450approximate street prices, September 2026

GLOCK MOS — 10 mm / .45 frames

Plate Adapter plate required

4 slides: GLOCK 20 Gen5 MOS (10 mm), GLOCK 21 Gen5 MOS (.45), GLOCK 40 MOS (10 mm), GLOCK 41 MOS (.45)

Plate
MOS Plate 07GLOCK factory
Plate → slide
M3Supplied with the plate.
Optic → plate
8-32 UNCNot in GLOCK's plate set, which holds the plate screws only. GLOCK says to fit the optic as its maker directs, with screws that do not come through the 2.5 mm plate.
Plate torque
13.1 in-lb (1.5 Nm)
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$313–475approximate street prices, September 2026

GLOCK MOS — standard & full size

Plate Adapter plate required

12 slides: GLOCK 19 Gen5 MOS, GLOCK 17 Gen5 MOS, GLOCK 45 Gen5 MOS, GLOCK 47 Gen5 MOS, GLOCK 49 Gen5 MOS, GLOCK 19X MOS, GLOCK 34 Gen5 MOS, GLOCK 26 Gen5 MOS, GLOCK 17 / 19 / 34 Gen4 MOS, GLOCK 22 / 23 Gen5 MOS (.40), GLOCK 35 Gen5 MOS (.40), GLOCK 44 MOS (.22 LR)

Plate
MOS Plate 03GLOCK factory; 1 other plate on the pair pages
Plate → slide
M3Supplied with the pistol, in the box with the cover plate.
Optic → plate
8-32 UNCNot in GLOCK's plate set, which holds the plate screws only. GLOCK says to fit the optic as its maker directs, with screws that do not come through the 2.5 mm plate.
Plate torque
13.1 in-lb (1.5 Nm)
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$313–475approximate street prices, September 2026

Rear-sight dovetail mount

Plate Dovetail mount required

2 slides: CZ P-07 / P-09 (standard, no optic cut), CZ 75 / SP-01 / Shadow 2 (non-OR)

Plate
Dovetail mount → RMR / C-More / Docter (type C)EGW
Mount → dovetail
set by the slideSupplied with the mount.
Optic → mount
per C-More kitSupplied with the plate, not the optic.
Plate torque
per mount instructions
Optic torque
per C-More manual
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Brass drift or sight pusher, Witness-mark paint or lacquer
To mount
$335–535approximate street prices, September 2026

S&W M&P C.O.R.E. / Optics Ready

Plate Fits on the plate in the box

8 slides: Smith & Wesson M&P9 M2.0 Optics Ready (4.25 / 4.6 / 5 in), Smith & Wesson M&P9 M2.0 Compact Optics Ready, Smith & Wesson M&P9 M2.0 Metal, Smith & Wesson Performance Center M&P9 M2.0 Metal / Spec Series, Smith & Wesson M&P10mm M2.0 Optics Ready, Smith & Wesson M&P9 C.O.R.E. (pre-M2.0), Smith & Wesson M&P Carry Comp, Smith & Wesson M&P Competitor

Plate
C.O.R.E. Plate 4 (C-More)S&W factory, ships with the pistol
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereLook in the pistol's box, with the plates. If there are none, buy a pair made for this plate.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$300–450approximate street prices, September 2026

Taurus T.O.R.O. plate system

Plate Verify Adapter plate required

2 slides: Taurus G3 TORO / G3X TORO, Taurus G3C TORO / G3X TORO

Plate
T.O.R.O. Plate #3Taurus factory; 1 other plate on the pair pages
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$313–475approximate street prices, September 2026

Walther PDP 2.0 optic cut

Plate Adapter plate required

2 slides: Walther PDP 2.0 Full Size, Walther PDP 2.0 Compact

Plate
PDP 2.0 → C-More RTSOptics Spot
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$325–510approximate street prices, September 2026

Walther Q4 SF / Q5 Match SF optic cut

Plate Adapter plate required

2 slides: Walther Q5 Match SF, Walther Q4 SF Optics Ready

Plate
Universal type EOptics Spot
Plate → slide
per plate maker, not on file hereSupplied with the plate.
Optic → plate
per plate maker, not on file hereSupplied with the plate, not the optic.
Plate torque
per plate instructions
Optic torque
per plate maker, not on file here
Tools
Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
To mount
$325–510approximate street prices, September 2026

Steps and safety: installing a red dot, from the makers' manuals. Mounting an optic is gunsmithing; confirm the pistol is unloaded first. Screw length is never listed here because it depends on the whole stack: each pair's build sheet has a calculator that works from your own caliper readings.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.