Home / Pistols / Smith & Wesson M&P Shield Plus Optics Ready / Steiner MPS

Does the Steiner MPS fit the Smith & Wesson M&P Shield Plus Optics Ready?

No: the slide is not cut for the Aimpoint ACRO footprint, and no plate listed here adapts it.

No known fit

Enclosed emitter

Nothing in this database adapts the S&W M&P Shield optics-ready cut interface to the Aimpoint ACRO pattern. Ask a plate maker before ruling it out.

SlideS&W M&P Shield optics-ready cut

Optic footprintAimpoint ACRO

Slide is cut forShield RMSc

Plates made for itHolosun K

New to red dots? What footprint, plate, co-witness and the rest mean →

On this modelMilled for the RMSc pattern: no plate for an RMSc-pattern optic.

How this slide mounts an opticMilled for the Shield RMSc pattern: an RMSc-pattern optic bolts straight on. S&W doesn't say a Holosun K optic does, and C&H sells a plate to put one on this slide, so this site lists the plate. Nameless Arms, which re-machines these pockets for K optics, says S&W cuts them sloping 0.5 to 0.75 degrees toward the muzzle, enough that some optics run short of elevation. Source: Nameless Arms, M&P Shield pocket re-machine for Holosun K ↗.

About this opticLarger window than the ACRO on the same clamp interface.

GuidesShield RMSc vs Holosun K: which optic fits which cut

What fits the Smith & Wesson M&P Shield Plus Optics Ready instead

22 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet →

Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet →

Popular optics that do fit it:

All 22 optics that fit it →

Where the Steiner MPS does go

It mounts to 87 of the 178 pistols tracked here, 1 of them with no adapter plate. The popular ones:

All 87 pistols it fits →

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.