Home / Pistols / Palmetto State Armory Dagger Full Size / Compact (RMR cut) / Vortex Defender-CCW

Does the Vortex Defender-CCW fit the Palmetto State Armory Dagger Full Size / Compact (RMR cut)?

No: the slide is not cut for the Shield RMSc footprint, and no plate listed here bridges it.

No known fit

Nothing in this database bridges the PSA Dagger RMR cut interface to the Shield RMSc pattern. The most widely milled cut on carry-size pistols. Accepts Holosun K optics, which simply leave the rear lugs unused. A custom plate or a re-mill would be the only route — check with a plate maker before assuming it can't be done.

SlidePSA Dagger RMR cut

Optic footprintShield RMSc

Slide is cut forTrijicon RMR

Plates made for itTrijicon RMR, Docter / Noblex

How this slide mounts an opticDagger slides have shipped with more than one optic cut. The common one is milled for the RMR footprint and takes an RMR-pattern optic directly. PSA also sells a Dagger RMR plate for the variants that need one, and EGW makes an RMR-to-Docter adapter — so check your slide before buying anything.

What fits the Palmetto State Armory Dagger Full Size / Compact (RMR cut) instead

27 of the 75 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$60–150Cyelee Cat / Wolfdirect — no adapterBuild sheet →

Cheapest with no plate$60–150Cyelee Cat / Wolfdirect — no adapterBuild sheet →

Cheapest enclosed emitter$450–650SIG Sauer ROMEO2plates included with the opticBuild sheet →

And the optics asked about most that do fit it:

All 27 optics that fit it →

Where the Vortex Defender-CCW does go

It mounts to 155 of the 178 pistols tracked here, 57 of them with no adapter plate. The ones asked about most:

All 155 pistols it fits →

Something on this page wrong? Say what it should be. Corrections from someone who owns the pistol are why this is worth more than a spec sheet — and nothing here changes without a source, so bring one.