Does the Aimpoint ACRO P-2 fit the Smith & Wesson M&P Shield Plus Optics Ready?

No, the Aimpoint ACRO P-2 does not fit the Smith & Wesson M&P Shield Plus Optics Ready: the slide is not cut for the Aimpoint ACRO footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the S&W M&P Shield Plus optics-ready cut interface to the Aimpoint ACRO pattern. Ask a plate maker before ruling it out.

SlideS&W M&P Shield Plus optics-ready cut
Optic footprintAimpoint ACRO
Slide is cut forShield RMSc
Plates made for itHolosun K
On this modelMilled for the RMSc pattern, which S&W's own articles name for it: no plate for an RMSc-pattern optic. S&W's Shield X and Carry Comp pages say RMSc/K; its Shield Plus pages do not mention the K footprint.
How this slide mounts an opticMilled for the Shield RMSc pattern: S&W's own articles say the optics-ready Shield Plus takes the "Shield RMS optic footprint" and "uses the RMSc footprint", and an RMSc-pattern optic bolts straight on. S&W doesn't say a Holosun K optic does (it does say so for the Shield X and the Carry Comp), and C&H sells plates to put a 407K / 507K or an EPS on this slide, so this site lists those. Nameless Arms, which re-machines these pockets for K optics, says it has measured S&W's pockets sloping 0.5 to 0.75 degrees toward the muzzle, enough that some optics run short of elevation. Source: Smith & Wesson, "Shield Plus now optics ready" (the optics-ready Shield Plus takes any Shield RMS optic footprint) ↗; Smith & Wesson, M&P Shield X vs. Shield Plus (the Shield Plus optics-ready models use the RMSc footprint; the Shield X is RMSc/K) ↗; Nameless Arms, M&P Shield pocket re-machine for Holosun K ↗.
About this optic50,000-hour runtime on one cell. Small window, sealed housing.

What fits the Smith & Wesson M&P Shield Plus Optics Ready instead

21 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 21 optics that fit it

Where the Aimpoint ACRO P-2 does go

It mounts to 84 of the 178 pistols tracked here, 1 of them with no adapter plate. The popular ones:

All 84 pistols it fits

Sources for this page (7)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Smith & Wesson M&P Shield Plus Optics Ready’s slide: S&W's Shield Plus / Shield X manual, Equalizer manual and Shield M1 / M2 manual (optic sections), the S&W product pages, spec sheets and articles for these pistols, and C&H's five listings for them checked against smith-wesson.com (pages, the manuals on its document store), shieldsights.com's screw listing and chpws.com's listings, read 2026-10-01 on October 1, 2026. Not individually re-checked since it was compiled (September 2026): the optic’s figures.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.