Does the Holosun 509T fit the CZ P-10 C Optics Ready? No: the slide is not cut for the Holosun 509T footprint, and no plate listed here bridges it.
No known fit Enclosed emitter Nothing in this database bridges the CZ P-10 OR plate system interface to the Holosun 509T pattern. Its own world. Almost always mounted on a dedicated 509T plate; steel plates are the common recommendation. A custom plate or a re-mill would be the only route — check with a plate maker before assuming it can't be done.
Slide CZ P-10 OR plate system
Slide is cut for no footprint — plates only
Plates made for it Trijicon RMR, Docter / Noblex, Leupold DeltaPoint Pro, Shield RMSc, Aimpoint ACRO, Holosun K
How this slide mounts an optic CZ supplies a plate set with the OR models.
About this optic Titanium; duty-oriented. Steel plates recommended.
What fits the CZ P-10 C Optics Ready instead 61 of the 75 optics tracked here mount to it. The cheapest ways in:
And the optics asked about most that do fit it:
All 61 optics that fit it →
Where the Holosun 509T does go It mounts to 48 of the 178 pistols tracked here. The ones asked about most:
All 48 pistols it fits →
Something on this page wrong?
Say what it should be . Corrections from someone who owns the pistol are why
this is worth more than a spec sheet — and nothing here changes without a source, so bring one.
Optic Mounting is a reference, not an authority. Footprints, plate numbering and slide cuts
change between generations and production runs of the same model name. Confirm against the current manuals
from both the pistol and optic makers, and against the plate maker's own fitment chart, before buying or
installing. Entries marked Verify are ones where published information
is thin or contested.
Screw length is the failure mode nobody catches. A screw that is too long bottoms out on the slide
or intrudes into the striker channel; one that is too short strips under recoil. Test-fit dry and count
threads. Blue removable threadlocker only, never red.
Safety, and the limits of this site. Confirm the firearm is unloaded before any work on the slide —
drop the magazine, lock the slide back, and check the chamber by sight and by feel. Mounting an optic is
gunsmithing: work within your own competence and use a qualified gunsmith when a job is past it. Information
here is provided as-is, with no warranty of any kind, and you use it at your own risk — Optic Mounting
accepts no liability for damage to a firearm or optic, for injury, or for money spent on parts that turn out
not to fit. Modifying a firearm may also carry legal consequences that vary by state and locality; that is
yours to check.
Data compiled September 2026 from manufacturer documentation and plate-maker fitment
charts. Prices are approximate street-price bands for comparing routes, not for budgeting to the dollar.
Manufacturer and product names are used for identification only; Optic Mounting is not affiliated with,
authorised by or endorsed by any manufacturer, and all trademarks remain the property of their respective
owners.
Home · All pistols · All optics ·
All footprints · Fit checker ·
Contact & corrections ·
Disclaimer, terms & privacy