Does the Holosun 509T fit the Springfield Armory Hellcat Pro?

No, the Holosun 509T does not fit the Springfield Armory Hellcat Pro: the slide is not cut for the Holosun 509T footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the Springfield Hellcat OSP cut (Micro footprint) interface to the Holosun 509T pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Springfield Armory Hellcat OSP, Springfield Armory Hellcat RDP and Springfield Armory Hellcat Pro Comp OSP either: they share this slide's optic cut.
SlideSpringfield Hellcat OSP cut (Micro footprint)
Optic footprintHolosun 509T
Slide is cut forShield RMSc
Plates made for itHolosun K, Trijicon RMR
How this slide mounts an opticMilled for what Springfield calls its Micro footprint, the Shield RMSc pattern: an RMSc-pattern optic, Springfield's own Hex Wasp included, bolts straight on. A Holosun K optic takes a plate: C&H says its plate is what lets a 407K or 507K go on without modifying the slide's recoil posts. Source: Springfield Armory, Hellcat Pro OSP (slide milled for the Springfield Micro footprint) ↗; HEX by Springfield Armory, HEX Wasp (Springfield Micro, Shield RMSc footprint) ↗; C&H Precision, Hellcat to Holosun 407K / 507K ↗.
About this opticTitanium; duty-oriented. Steel plates recommended.

What fits the Springfield Armory Hellcat Pro instead

29 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 29 optics that fit it

Where the Holosun 509T does go

It mounts to 70 of the 178 pistols tracked here. The popular ones:

All 70 pistols it fits

Sources for this page (7)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Holosun 509T: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Springfield Armory Hellcat Pro’s slide: slide screw thread, the footprint's name and the optics Springfield names checked against Springfield's Hellcat manual, hardware kit page and Hellcat Pro OSP page, and HEX's Wasp page on September 30, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.