Does the Trijicon RMRcc fit the Heckler & Koch VP9 Optics Ready?
No: the slide is not cut for the Trijicon RMRcc footprint, and no plate listed here bridges it.
No known fit
Nothing in this database bridges the HK VP9 / SFP9 OR plate system interface to the Trijicon RMRcc pattern. Looks like a small RMR and is not one. Needs its own cut or plate; will not sit on an RMR or RMSc pattern. A custom plate or a re-mill would be the only route — check with a plate maker before assuming it can't be done.
Plates made for itTrijicon RMR, Leupold DeltaPoint Pro, Docter / Noblex, Shield RMSc, Holosun K, C-More RTS2 / STS2
How this slide mounts an opticVP9 OR and the European SFP9 OR share one plate set. Coverage turned out to be broader than the thin factory kit suggests once the aftermarket is counted.
What fits the Heckler & Koch VP9 Optics Ready instead
57 of the 75 optics tracked here mount to it. The cheapest ways in:
Something on this page wrong?Say what it should be. Corrections from someone who owns the pistol are why
this is worth more than a spec sheet — and nothing here changes without a source, so bring one.