Home / Pistols / GLOCK 48 MOS / Aimpoint ACRO P-2

Does the Aimpoint ACRO P-2 fit the GLOCK 48 MOS?

No, the Aimpoint ACRO P-2 does not fit the GLOCK 48 MOS: the slide is not cut for the Aimpoint ACRO footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the GLOCK Slimline MOS (43X / 48) interface to the Aimpoint ACRO pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the GLOCK 43X MOS and GLOCK 43X / 48 Rail MOS either: they share this slide's optic cut.
SlideGLOCK Slimline MOS (43X / 48)
Optic footprintAimpoint ACRO
Slide is cut forShield RMSc
Plates made for itHolosun K, Trijicon RMRcc, Trijicon RMR
On this modelThe original four-lug Slimline MOS cut. To tell it from the later MOS-K slide, read the item number on the box or the GLOCK paperwork: it ends in MOS here and in MOSK on the MOS-K.
How this slide mounts an opticMilled for the RMSc pattern: four recoil bosses, two at the front of the cut and two at the rear, and M4 screws. GLOCK's own page says the standard cut fits the Shield RMSc footprint, and that no adapter plates come with these pistols. An RMSc-pattern optic bolts straight on. A Holosun K optic does not: its underside is cut for two bosses, so on this four-boss cut it needs a plate. GLOCK's later MOS-K slide takes either a Holosun K or an RMSc-pattern optic with no plate; the item number on the box ends in MOSK rather than MOS. Source: Night Fision, Glock updates to the Slimline MOS cut: MOS-K ↗.
About this optic50,000-hour runtime on one cell. Small window, sealed housing.

What fits the GLOCK 48 MOS instead

31 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 31 optics that fit it

Where the Aimpoint ACRO P-2 does go

It mounts to 84 of the 178 pistols tracked here, 1 of them with no adapter plate. The popular ones:

All 84 pistols it fits

Sources for this page (6)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The GLOCK 48 MOS’s slide: screw threads, plate hardware and which optics each plate takes checked against GLOCK's OR plates set sheet (01/26) and Optic Ready System page; C&H's and Trijicon's own listings on October 1, 2026. Not individually re-checked since it was compiled (September 2026): the optic’s figures.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.