Does the Steiner MPS fit the Taurus GX4 TORO / GX4XL?

No, the Steiner MPS does not fit the Taurus GX4 TORO / GX4XL: the slide is not cut for the Aimpoint ACRO footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Enclosed emitter

Nothing in this database adapts the Taurus GX4 T.O.R.O. direct cut interface to the Aimpoint ACRO pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Taurus GX4 Carry TORO and Taurus GX4 Graphene TORO either: they share this slide's optic cut.
SlideTaurus GX4 T.O.R.O. direct cut
Optic footprintAimpoint ACRO
Slide is cut forShield RMSc, Holosun K
Plates made for itTrijicon RMRcc
How this slide mounts an opticMilled for the Shield RMSc pattern, so Shield RMSc and Holosun K optics bolt straight on. Taurus's manual and its parts store list the Riton 3 Tactix MPRD 2, Sightmark Mini Shot A-Spec M3, Shield RMSc, Holosun 407K / 507K, SIG RomeoZero and HEX Wasp for the cut, and the Trijicon RMRcc only with an adapter plate that Taurus sells separately (it says the RMRcc will not work on the GX4 T.O.R.O. without it). The pistol ships with a flush slide cover over the cut, not a plate; the optic and the adapter plate are not included. Taurus gives 8.2 in-lbs for the two screws that hold an optic, with Loctite 242 and a 24-hour cure. It gives no torque for the adapter plate's own screws. Source: ShopTaurus, Taurus GX4 T.O.R.O. Conversion Kit (footprint list; the Trijicon RMRcc adapter plate is sold separately) ↗; ShopTaurus, Taurus GX4/GX4XL/GX4 Carry TORO Slide Cover Screws ↗.
About this opticLarger window than the ACRO on the same clamp interface.

What fits the Taurus GX4 TORO / GX4XL instead

23 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall, and with no plate$60–150SIG Sauer ROMEOZerodirect — no adapterBuild sheet
Cheapest enclosed emitter$300–450Holosun EPS-COREdirect — no adapterBuild sheet

Popular optics that do fit it:

All 23 optics that fit it

Where the Steiner MPS does go

It mounts to 77 of the 178 pistols tracked here, 1 of them with no adapter plate. The popular ones:

All 77 pistols it fits

Sources for this page (5)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Steiner MPS: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Taurus GX4 TORO / GX4XL’s slide: Taurus GX4 T.O.R.O. cut: footprint, direct list, thread, torque, the RMRcc adapter plate, what ships in the box checked against Taurus GX4 instruction manual, T.O.R.O. configuration pp. 28-31 (distributor-hosted copy of Taurus's file); ShopTaurus (Taurus's own store): Trijicon RMRcc adapter plate listing, T.O.R.O. conversion kit and slide kit pages, T.O.R.O. cover screw and adapter pin listings on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.