Home / Pistols / Canik METE SFx / Trijicon RMR Type 2

Does the Trijicon RMR Type 2 fit the Canik METE SFx?

It depends on your serial number: the Canik METE SFx takes the Trijicon RMR Type 2's Trijicon RMR footprint on some production runs and not others.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

Depends on your serial

Canik cuts the METE for RMSc plus a second pattern that changed during production: RMRcc on earlier slides, RMR on later ones (METE SFT from serial 25CC08376, METE SFT Pro from 25CY04801, METE SFx from 26BY00001). Check your serial against Canik's product page before buying this optic.

Same answer forNo known fit on the Canik METE SFT, Canik METE SF and Canik METE SFT Pro either: they share this slide's optic cut.
SlideCanik METE optic cut (RMSc plus RMRcc or RMR)
Optic footprintTrijicon RMR
Slide is cut forno footprint — plates only
Plates made for itShield RMSc, Holosun K, Aimpoint ACRO, Holosun 509T
How this slide mounts an opticCanik cuts the METE slide for two patterns at once. One is Shield RMSc, on every METE. The other changed during production: Canik lists RMRcc on earlier slides and RMR on later ones (METE SFT from serial 25CC08376, METE SFT Pro from 25CY04801, METE SFx from 26BY00001, METE SF after 25BU15401, which it words as "RMSc and RMR"). Canik's manuals say the pistol comes with three optic interfaces (numbers 1, 2 and 3): 1 and 2 take the RMSc pattern optics (Canik names Shield RMS, RMSc and SMSc, JPoint, SIG ROMEOZero, Sightmark Mini Shot A-Spec M3, Swampfox Sentinel and the Mecanik MO1), and 3 takes the RMR pattern. An optic goes on one of them, not straight onto the slide. Canik says to use only the screws that came with the pistol to mount an optic; for the RMR-pattern interface 3, only the #6-32 screws in the optic's own box, not the M3 or M4 screws packed for other footprints. Canik's product pages say a pistol's case holds two or three interfaces, so check the case. Only the RMSc pattern is listed as a fit here: the second one depends on your serial, so check it against Canik's product page before buying an RMR or RMRcc optic. Canik names no Holosun K optic, and no Canik document gives a torque for the interfaces or the optic screws. Source: Canik, METE SFT product page (serial numbers by optic footprint) ↗; Canik, METE SFx product page ↗; Canik, METE SF product page ↗; Canik, METE SFT Pro product page ↗.

What fits the Canik METE SFx instead

28 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$60–150SIG Sauer ROMEOZeroin-box plate: Canik interface 01 or 02 → RMScBuild sheet
Cheapest enclosed emitter$210–395Viridian RFX45plate: METE → ACROBuild sheet

Popular optics that do fit it:

All 28 optics that fit it

Where the Trijicon RMR Type 2 does go

It mounts to 110 of the 178 pistols tracked here, 11 of them with no adapter plate. The popular ones:

All 110 pistols it fits

Sources for this page (9)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Trijicon RMR Type 2: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Canik METE SFx’s slide: optic interface plates: which optics each takes, what ships with the pistol, the screws Canik names, and the listing link checked against Canik's owner's manuals (METE SFT, SFx, SF and SFT Pro; TP9 SFx; SFx Rival and Rival-S; TTI Combat; TP9 Elite SC), its product and parts pages on canik.com, and Calculated Kinetics' own listings on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.