Moving the Holosun 507K X2 between pistols
Page last updated . Data compiled September 2026 by Andrew Terrebonne.
You already own it. Here is what changes from one slide to the next: the plate, the screw thread at each joint, the torque, the tools and any thread trap. 42 kinds of slide, covering 141 pistols, grouped by how the optic mounts and then alphabetically. Nothing is ranked. The Holosun 507K X2 page has its specs and the per-pair answers.
28 of the 42 blocks have a figure marked not on file: no maker publishes it where this site could find it, so the plate maker or a gunsmith is the source. How the data is checked.
Mounts straight to the slide
CZ Nocturne direct cut
Direct Direct mount
2 slides: CZ P-09 Nocturne / P-09C Nocturne, CZ P-07 Nocturne
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
CZ Shadow 2 Carry direct cut (Shield RMSc and Holosun K)
Direct (cross-fit) Direct mount — cross-compatible
Slide: CZ Shadow 2 Carry
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
GLOCK Slimline MOS-K
Direct Direct mount
Slide: GLOCK 43X / 48 MOS-K
- Optic → slide
- M3Supplied with the optic: the M3 pair.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
RMSc-pattern direct cut
Direct (cross-fit) Direct mount — cross-compatible
24 slides: Smith & Wesson M&P 22 Magnum, Smith & Wesson CSX E-Series Optics Ready, Springfield Armory XD-S Mod.2 OSP, Canik METE MC9 / MC9L, FN Reflex MRD, Beretta APX A1 Carry, Ruger MAX-9, Ruger Ruger-5.7 Optics Ready, Taurus TX22 Compact, Staccato CS, Palmetto State Armory Dagger Micro, Palmetto State Armory 5.7 Rock Optics Ready, Mossberg MC2sc Optic Ready, IWI Masada Slim, Archon Firearms Type B / Type D OR, Girsan Witness2311, Tisas Carry DS / Duty DS, Stoeger STR-9MC, SCCY CPX RDR / DVG-1 RDR, Avidity Arms PD10, Rock Island Armory STK100, Bersa BP9CC OR, Smith & Wesson M&P Shield Plus Carry Comp, Canik METE MC9 Prime
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
S&W M&P 5.7 direct cut
Direct (cross-fit) Direct mount — cross-compatible
Slide: Smith & Wesson M&P 5.7
- Optic → slide
- #6-32 × 1/2 inBuy #6-32 screws. The ones in the optic's box are cut for M3 and M4.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Shadow Systems CR920 optic cut (RMSc pattern)
Direct (cross-fit) Direct mount — cross-compatible
Slide: Shadow Systems CR920 / CR920P
- Optic → slide
- Not on file: Shadow Systems supplies the screws in its optic kitShadow's optic kit, taped inside the pistol box lid: screws I in Shadow's optic-fit table; a round or cross spacer, at the front of the recess.
- Optic torque
- 10–20 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Shadow Systems multi-optic cut (MR920, DR920, XR920)
Direct (cross-fit) Direct mount — cross-compatible
5 slides: Shadow Systems MR920, Shadow Systems DR920 / DR920P, Shadow Systems XR920 / XR920P, Shadow Systems Foundation Series, Shadow Systems MR920 Elite / Combat
- Optic → slide
- Not on file: Shadow Systems supplies the screws in its optic kitShadow's optic kit, taped inside the pistol box lid: screws 1 in Shadow's optic-fit table; spacer D, under the optic, is optional.
- Optic torque
- 10–20 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
SIG P322 optic cut (RMSc pattern)
Direct (cross-fit) Direct mount — cross-compatible
Slide: SIG Sauer P322 / P322 Comp
- Optic → slide
- M3 × 0.5Supplied with the optic: the M3 pair.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
SIG P365 optic cut (RMSc pattern)
Direct (cross-fit) Direct mount — cross-compatible
7 slides: SIG Sauer P365 Optics Ready, SIG Sauer P365X, SIG Sauer P365XL, SIG Sauer P365-XMACRO / XMACRO Comp, SIG Sauer P365-AXG Legion, SIG Sauer P365-380, SIG Sauer P365 Fuse
- Optic → slide
- M3 × 0.5 or M4 × 0.7, by slideSupplied with the optic: use the pair that matches your slide.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Springfield Echelon VIS
Direct (cross-fit) Direct mount — cross-compatible
3 slides: Springfield Armory Echelon, Springfield Armory Echelon 4.0C, Springfield Armory Echelon Compact 4.5C
- Pins → slide
- No thread — interference fitPin set 1, per Springfield's VIS fitment chart.
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic. Springfield says they may need modification.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Tweezers, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Taurus 856 T.O.R.O. revolver cut
Direct (cross-fit) Direct mount — cross-compatible
Slide: Taurus Defender 856 TORO
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Taurus GX4 T.O.R.O. direct cut
Direct (cross-fit) Direct mount — cross-compatible
3 slides: Taurus GX4 TORO / GX4XL, Taurus GX4 Carry TORO, Taurus GX4 Graphene TORO
- Optic → slide
- M4 × 0.7Supplied with the optic: the M4 pair.
- Optic torque
- 8.2 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Taurus Judge T.O.R.O. revolver cut
Direct (cross-fit) Direct mount — cross-compatible
Slide: Taurus Judge TORO / Raging Hunter
- Optic → slide
- M3, M4 or #6-32, by opticSupplied with the optic.
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
Mounts on a plate
Arex Delta Gen.2 plate system
Plate Adapter plate required
Slide: Arex Delta Gen.2
- Plate
- Delta Gen.2 optic plate — type 5Aftermarket
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Beretta 80X Cheetah plate system
Plate Adapter plate required
Slide: Beretta 80X Cheetah
- Plate
- 80X Cheetah → Holosun KBeretta factory
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Canik METE optic cut (RMSc plus RMRcc or RMR)
Plate Adapter plate required
4 slides: Canik METE SFT, Canik METE SFx, Canik METE SF, Canik METE SFT Pro
- Plate
- METE → Holosun K DOGTAGCalculated Kinetics
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate: Calculated Kinetics includes the hardware, a Torx bit and Vibratite.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
Canik SFx Rival optic interface plates
Plate Adapter plate required
Slide: Canik SFx Rival / Rival-S
- Plate
- TP9 DOGTAG → Holosun KCalculated Kinetics
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate: Calculated Kinetics includes the hardware, a Torx bit and Vibratite.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
Canik TP9 Elite SC optic interface
Plate Adapter plate required
Slide: Canik TP9 Elite SC
- Plate
- Elite SC → Holosun KCalculated Kinetics
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate: Calculated Kinetics includes the hardware, Vibratite and installation instructions.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Canik TP9 SFx optic interface plates
Plate Adapter plate required
Slide: Canik TP9 SFx
- Plate
- TP9 DOGTAG → Holosun KCalculated Kinetics
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate: Calculated Kinetics includes the hardware, a Torx bit and Vibratite.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
Canik TTI Combat optic interface plates
Plate Adapter plate required
2 slides: Canik TTI Combat, Canik TTI Combat Master
- Plate
- TTI → Holosun K DOGTAGCalculated Kinetics
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate: Calculated Kinetics includes the hardware, a Torx bit, Vibratite and an install card.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
CZ P-10 OR plate system
Plate Adapter plate required
3 slides: CZ P-10 C Optics Ready, CZ P-10 F Optics Ready, CZ P-10 S Optics Ready
- Plate
- P-10 OR → RMSc / Holosun KCZ factory
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- 1.3 Nm (11.5 in-lb)
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
CZ Shadow 2 OR plate system
Plate Adapter plate required
2 slides: CZ Shadow 2 Optics Ready, CZ Shadow 2 Compact Optics Ready
- Plate
- Shadow 2 OR → RMSc / Holosun KCZ factory
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
FN MRD plate system
Plate Adapter plate required
5 slides: FN 509 MRD / Tactical, FN 509 Midsize MRD / Compact MRD, FN 509 LS Edge, FN 510 / 545 MRD, FN 509 CC Edge
- Plate
- FN MRD → Holosun K / EPSC&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
GLOCK Gen6 ORS
Plate Adapter plate required
Slide: GLOCK 17 / 19 / 45 Gen6 (ORS)
- Plate
- Gen 6 MIL/LEO → Holosun 407K / 507K / SIG ROMEOZero / Olight Osight K, SC&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- M4Supplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
GLOCK MOS — 10 mm / .45 frames
Plate Adapter plate required
4 slides: GLOCK 20 Gen5 MOS (10 mm), GLOCK 21 Gen5 MOS (.45), GLOCK 40 MOS (10 mm), GLOCK 41 MOS (.45)
- Plate
- V4 MIL/LEO (large frame)C&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here (13.1 in-lb (1.5 Nm) is the slide maker's figure for its own plates, not this one)
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
GLOCK MOS — standard & full size
Plate Adapter plate required
12 slides: GLOCK 19 Gen5 MOS, GLOCK 17 Gen5 MOS, GLOCK 45 Gen5 MOS, GLOCK 47 Gen5 MOS, GLOCK 49 Gen5 MOS, GLOCK 19X MOS, GLOCK 34 Gen5 MOS, GLOCK 26 Gen5 MOS, GLOCK 17 / 19 / 34 Gen4 MOS, GLOCK 22 / 23 Gen5 MOS (.40), GLOCK 35 Gen5 MOS (.40), GLOCK 44 MOS (.22 LR)
- Plate
- V4 MIL/LEO (one SKU per footprint)C&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here (13.1 in-lb (1.5 Nm) is the slide maker's figure for its own plates, not this one)
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
GLOCK Slimline MOS (43X / 48)
Plate Adapter plate required
3 slides: GLOCK 43X MOS, GLOCK 48 MOS, GLOCK 43X / 48 Rail MOS
- Plate
- V4 MIL/LEO 43X / 48 MOS → Holosun 407K / 507KC&H Precision
- Plate → slide
- M4Supplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
HK VP9 / SFP9 OR plate system
Plate Adapter plate required
4 slides: Heckler & Koch VP9 Optics Ready, Heckler & Koch VP9 Match OR, Heckler & Koch VP9SK Optics Ready, Heckler & Koch SFP9 OR (European VP9)
- Plate
- HK Holosun K plate (51000381)HK factory; 2 other plates on the pair pages
- Plate → slide
- M4The two screws that hold the cover plate on the slide, reused for the plate (HK sells spares, part 50947116, and says to replace them after 2,000 rounds).
- Optic → plate
- per plate maker, not on file hereNot stated in HK's manual or plate listing: check with HK USA, or the optic's box, before buying.
- Plate torque
- 2 Nm (17.7 in-lb, converted)
- Optic torque
- per the optic maker (HK's manual gives no figure)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Kimber KDS9c plate system
Plate Adapter plate required
Slide: Kimber KDS9c
- Plate
- KDS9c → RMSc / Holosun K (incl. rear sight)Kimber factory
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Kimber R7 Mako plate system
Plate Adapter plate required
Slide: Kimber R7 Mako
- Plate
- R7 Mako → Holosun 407K / 507K / Osight SC&H Precision; 1 other plate on the pair pages
- Plate → slide
- #6-32Supplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Rear-sight dovetail mount
Plate Dovetail mount required
2 slides: CZ P-07 / P-09 (standard, no optic cut), CZ 75 / SP-01 / Shadow 2 (non-OR)
- Plate
- Dovetail mount → Holosun KEGW
- Mount → dovetail
- set by the slideSupplied with the mount.
- Optic → mount
- M3, M4 or #6-32, by opticSupplied with the plate, not the optic.
- Plate torque
- per mount instructions
- Optic torque
- 15 in-lb
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Brass drift or sight pusher, Witness-mark paint or lacquer
- To mount
- $335–535approximate street prices, September 2026
Ruger RXM direct-mount optic cut (RMR, DPP, RMSc)
Plate Adapter plate required
2 slides: Ruger RXM, Ruger RXM Compact
- Plate
- RXM → Holosun 407K / 507KC&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- M4Supplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
S&W Equalizer optic cut
Plate Adapter plate required
Slide: Smith & Wesson M&P Equalizer
- Plate
- Equalizer / M&P 5.7 → Holosun 407K / 507KC&H Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
S&W M&P C.O.R.E. / Optics Ready
Plate Fits on the plate in the box
8 slides: Smith & Wesson M&P9 M2.0 Optics Ready (4.25 / 4.6 / 5 in), Smith & Wesson M&P9 M2.0 Compact Optics Ready, Smith & Wesson M&P9 M2.0 Metal, Smith & Wesson Performance Center M&P9 M2.0 Metal / Spec Series, Smith & Wesson M&P10mm M2.0 Optics Ready, Smith & Wesson M&P9 C.O.R.E. (pre-M2.0), Smith & Wesson M&P Carry Comp, Smith & Wesson M&P Competitor
- Plate
- C.O.R.E. Plate 2 (Shield / RMSc family)S&W factory, ships with the pistol; 3 other plates on the pair pages
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereLook in the pistol's box, with the plates. If there are none, buy a pair made for this plate.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $300–450approximate street prices, September 2026
S&W M&P Shield Plus optics-ready cut
Plate Adapter plate required
Slide: Smith & Wesson M&P Shield Plus Optics Ready
- Plate
- M&P Shield Plus → Holosun 407K / 507KC&H Precision
- Plate → slide
- #6-32Supplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
SIG P320 optic cut (Romeo1Pro pattern)
Plate Adapter plate required
7 slides: SIG Sauer P320 X-Carry, SIG Sauer P320 XCompact, SIG Sauer P320 XFive Legion, SIG Sauer P320 XTen, SIG Sauer P320 AXG Legion / AXG Pro, SIG Sauer P320 Spectre Comp, SIG Sauer P320-M17 / M18
- Plate
- P320 → Holosun 407K / 507K / Vortex Defender-CCW / Olight Osight SC&H Precision
- Plate → slide
- M4 × 0.7Supplied with the plate.
- Optic → plate
- M4Supplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Springfield AOS
Plate Adapter plate required
3 slides: Springfield Armory Prodigy (1911 DS), Springfield Armory 1911 DS Operator AOS, Springfield Armory XD-M Elite OSP
- Plate
- AOS → Holosun K / EPSC&H Precision
- Plate → slide
- #6-48Supplied with the plate.
- Optic → plate
- 4-40 (into the plate's T-nuts)Supplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Springfield Hellcat OSP cut (Micro footprint)
Plate Adapter plate required
4 slides: Springfield Armory Hellcat OSP, Springfield Armory Hellcat Pro, Springfield Armory Hellcat RDP, Springfield Armory Hellcat Pro Comp OSP
- Plate
- Hellcat (RMSc footprint) → Holosun 407K / 507KC&H Precision
- Plate → slide
- M4Supplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Staccato / 2011 optic plate system
Plate Adapter plate required
4 slides: Staccato C2, Staccato P, Staccato XC, Staccato XL
- Plate
- Staccato → Holosun 507KDawson Precision
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here (25 in-lb is the slide maker's figure for its own plates, not this one)
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $360–545approximate street prices, September 2026
Taurus T.O.R.O. plate system
Plate Verify Adapter plate required
2 slides: Taurus G3 TORO / G3X TORO, Taurus G3C TORO / G3X TORO
- Plate
- T.O.R.O. → Holosun 407K / 507KC&H Precision; 1 other plate on the pair pages
- Plate → slide
- per plate maker, not on file hereSupplied with the plate.
- Optic → plate
- per plate maker, not on file hereSupplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Walther PDP 1.0 optic cut
Plate Adapter plate required
7 slides: Walther PDP Full Size (1.0), Walther PDP Compact (1.0), Walther PDP F-Series, Walther PDP Pro SD, Walther PDP Pro, Walther PDP Steel Frame, Walther PDP Compact F-Series
- Plate
- PDP 1.0 → Holosun 407K / 507K / Osight SC&H Precision
- Plate → slide
- M3Supplied with the plate.
- Optic → plate
- 4-40 (into the plate's T-nuts)Supplied with the plate, not the optic.
- Plate torque
- per plate maker, not on file here (approximately 2 Nm (17.7 in-lb) is the slide maker's figure for its own plates, not this one)
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Walther PDP 2.0 optic cut
Plate Adapter plate required
2 slides: Walther PDP 2.0 Full Size, Walther PDP 2.0 Compact
- Plate
- PDP 2.0 → Holosun K / EPSC&H Precision
- Plate → slide
- M3Supplied with the plate.
- Optic → plate
- 4-40 (into the plate's T-nuts)Supplied with the plate, not the optic.
- Plate torque
- per plate instructions
- Optic torque
- per plate maker, not on file here (15 in-lb is the optic maker's figure for mounting it straight on a slide)
- Tools
- Torque wrench, Driver bits, Calipers, Degreaser, A parts tray, Witness-mark paint or lacquer
- To mount
- $325–510approximate street prices, September 2026
Steps and safety: installing a red dot, from the makers' manuals. Mounting an optic is gunsmithing; confirm the pistol is unloaded first. Screw length is never listed here because it depends on the whole stack: each pair's build sheet has a calculator that works from your own caliper readings.