Home / Pistols / Staccato P / Holosun 407K X2

Does the Holosun 407K X2 fit the Staccato P?

No, the Holosun 407K X2 does not fit the Staccato P: the slide is not cut for the Holosun K footprint, and no plate listed here adapts it.

Page last updated . Data compiled September 2026 by Andrew Terrebonne.

No known fit

Nothing in this database adapts the Staccato / 2011 optic plate system interface to the Holosun K pattern. Ask a plate maker before ruling it out.

Same answer forNo known fit on the Staccato C2, Staccato XC and Staccato XL either: they share this slide's optic cut.
SlideStaccato / 2011 optic plate system
Optic footprintHolosun K
Slide is cut forno footprint — plates only
Plates made for itTrijicon RMR, Leupold DeltaPoint Pro, Shield RMSc, Aimpoint ACRO, Holosun K, Holosun 509T, Trijicon RMRcc
On this modelStaccato's ROMEOZero / JPoint / Shield kit is listed for the CS and C2, not the P; Dawson lists its carry plates for DPO pistols with a carry-height front sight. Ask Staccato before buying a carry plate.
How this slide mounts an opticOptic-ready Staccato slides take Dawson Precision's DPO plates, one for each optic: the plate replaces the slide's cover plate and carries the rear sight, so it also sets the iron-sight height. Staccato says the system is proprietary (other makers' plates do not fit), names the optics it supports, and will not modify a plate for one it does not name, so each plate below is limited to the optics its maker lists. Staccato's kit listings give 25 in-lb for the kit and do not say whether that is the plate screws or the optic screws; neither maker gives a thread, so the thread is not on file. Staccato's kits are for its V2 and V3 pistols, not the HD series. Its XC and XL pages say optic-specific mounting plates are included with the Tactical Optic system but not whether one comes in the pistol's box, so no plate is counted as in the box. Source: Staccato, Staccato P product page (free optic mounting with an optic and its plate) ↗; Staccato, Staccato XC product page ("optic-specific Staccato mounting plates are included") ↗; Staccato, Dawson Precision optic system slide milling service (C, C2 and P) ↗.

What fits the Staccato P instead

20 of the 77 optics tracked here mount to it. The cheapest ways in:

Cheapest overall$120–245SIG Sauer ROMEOZeroplate: Staccato → ROMEOZero / JPoint / Shield RMScBuild sheet
Cheapest enclosed emitter$360–545Holosun EPS Carryplate: Staccato → Holosun EPS / EPS Carry / SCS CarryBuild sheet

Popular optics that do fit it:

All 20 optics that fit it

Where the Holosun 407K X2 does go

It mounts to 137 of the 178 pistols tracked here, 51 of them with no adapter plate. The popular ones:

All 137 pistols it fits

Sources for this page (6)

Data compiled September 2026 from these documents. A figure with no source here is marked "not on file" on the page. How the data is checked.

Last checked against the makers’ documents. The Holosun 407K X2: window, weight and dot checked against the maker's own spec sheet or manual on September 26, 2026. The Staccato P’s slide: The Staccato DPO plate system: Staccato's optic mounting kit category and the seven DPO kit pages, its knowledge-center FAQs (optic chart, torque chart, optic-ready, other makers' plates), the C2, P, XC and XL product pages, the optic mounting and slide milling service pages, and Dawson Precision's eleven Staccato DPO plate listings (2026-10-01). checked against Staccato's own store and knowledge center (staccato2011.com) and Dawson Precision's own listings (dawsonprecision.com) on October 1, 2026.

Something on this page wrong? Tell us what it should be, and include a source: nothing changes without one.